产品简介
产品名称:TE系列防腐型标准孔板流量计产品型号:TE系列PTFE材质,用于液体或气体产品介绍The Series TE Orifice Plate Flowmeter of
公司简介
美国德威尔(Dwyer)仪器仪表授权中国代理——深圳市德威达科技有限公司
深圳市德威达科技有限公司 (Shenzhen Deweida Technology Co., Ltd.)是从事自动控制系统开发和仪器仪表等机电产品销售的高科技专业公司。 公司人员有着多年的工业自动控制和楼宇自动控制经验 ,技术力量雄厚。公司代理品牌有 美国 DWYER、ANDERSON、MERCOID、ITT、德国BECK、新加坡TELASIA等,产品涉及压力、流量、液位物位、风速、温湿度、阀门、气体检测、燃烧、数据采集等,广泛应用于工业自动化、暖通空调、楼宇自控、电厂、石油、化工、水处理,锅炉、压缩机、冷冻制冷设备、食品、医药、纺织、造纸、电子、环保、洁净工程等领域。
展开
产品说明
产品名称: TE系列防腐型标准孔板流量计
产品型号: TE系列
PTFE材质,用于液体或气体
产品介绍
The Series TE Orifice Plate Flowmeter offers one-piece PTFE construction similar to the OP and PE Series orifice plates, which incorporate a unique holder or carrier ring containing metering taps and integral gaskets. Available for line sizes from 1/2" to 24", the Series TE orifice plate can be used with gases, liquids, corrosive, and high temperature fluids. The Series TE can be easily installed by slipping the unit between standard flanges (orifice flanges are not required). The Series TE was designed for use anywhere there is an application for a conventional flow orifice plate. It can also be used in place of other primary differential producers for efficiency and cost effectiveness.
技术参数
介质: Air and compatible gases, corrosives, high temperature fluids, and liquids.
精度: ±0.6% full scale flow (Beta = .2-.6) ±0.7% for Beta greater than .6.
温度: -40 to 200°F (-40 to 93.3°C).
压力: 150 psi max (10 bar max).
压损: 1-Beta ratio² eg: 1 - 0.7² = 1 - 0.49 = 51% of the d.p.
尺寸: 1/2" to 24", special and non-standard sizes available.
连接: 1/4" female NPT.
安装: Standard flange 125#/150# rating.
管路: General requirements 10 diameter upstream and 5 diameter downstream.
重量: Varies with line size. See catalog page.
选型:
1/2" 到24",请咨询我司。
本页产品地址:http://www.yi7.com/sell/show-98312.html