产品目录
- 中央信号系统方案
- 韩国 Master
- 高清信号源
- 模拟/数字电视产品
- 日本柯尼卡美能达 Konica minolta
- 颜色及外观测量
- 光/显示器测量
- 日本菊水 Kikusui
- 安规测试仪
- 交/直流电源
- 电子负载
- 信号发生器/抖晃仪
- 北京普源 Rigol
- 信号发生器
- 频谱分析仪
- 数字示波器
- 数字万用表
- 直流电源
- 电子负载
- 数据采集/开关系统
- 电子负载
- 示波器探头/附件
- 德国德图 Testo
- 红外热像仪
- 温湿度产品
- 电子记录仪
- 环境/室内测量仪
- 台湾华仪 Extech
- 安规综合测试仪
- 耐压绝缘测试仪
- 接地电阻测试仪
- 泄漏电流测试仪
- 交流电源
- 美国 Flir
- 红外热像仪
- 万用表
- 环境类测试仪表
- 工业内窥镜
- 日本日置 Hioki
- 电子测量仪表
- 记录仪/数据采集仪
- 电池测试仪
- 安规/安全标准测试仪
- 电流传感器
- 电力测量仪器
- 环境类测量仪表
- 日本德士 Texio
- 可编程直流稳压电源
- 电子负载
- 示波器
- 通用测量仪器
- 信号发生器
- 台湾致茂 Chroma
- 可编程交/直流电源
- 交/直流电子负载
- 视频图像产生器
- 电气安规测试仪
- LCR表/自动变压器测试系统
- 数位式功率计
- 色彩分析仪
- 英国 Aim-tti
- 信号发生器
- 电子负载
- 直流稳压电源
- 频谱分析仪
- LCR数字电桥
- 频率计
- 数字万用表
- 数字源表
- 美国泰克 Tektronix
- 示波器探头/附件
- 数字示波器
- 信号发生器
- 频谱分析仪
- 直流电源
- 频率计数器/定时器
- 香港 Pro-instrument
- 美国福禄克 Fluke
- 安规测试仪
- 红外热像仪
- 示波表
- 数据采集仪
- 其他测试仪表
- 校准仪
- 美国是德 Keysight
- 信号发生器
- 直流电源
- 示波器
- LCR/阻抗测试
- 频谱分析仪
- 热像仪
- 频率计数器
- 万用表
- 直流电子负载
- 功率分析仪
- 数据采集器
- 美国 DESCO
- 静电测试仪
- 日本 图技GRAPHTEC
- 记录仪
- 天马TENMA
- LabSat GNSS GPS导航模拟器
- 南京长盛
- 青智
- 德国 EA ELEKTRO-AUTOMATIK
- 实验室直流电源
- 罗德与施瓦茨R&S
- 美国B&K PRECISION
- 美国艾示科 EXTECH
- 钳表 红外测温仪
- 环境和机械测试
- 优利德 UNI-T
- 数字示波器
- 钳表
- 频谱分析仪
- 热像仪
- 台湾 博计Prodigit
- 电子负载
- 分流器/功率表
- 美国 力科LeCory
- 示波器
- 吉时利 Keithley
- 直流电源
- 数字源表
- 数字万用表
- 台湾 阳光
- 台湾 固纬GWinstek
- 频谱分析仪
- 数字示波器
- 信号源
- 电源
- 基础测量仪器
- 交流电源
- 英国Pico Technology
- USB示波器
- 数据记录仪
- 日本 横河Yokogawa
- 数字功率仪
- 数据采集设备
- 信号发生器/信号源
- Everfine/远方
联系我们
公司名称:深圳市深东金仪器有限公司
联系人:梁经理
电话:0755-33217630 33217631
手机:13530851851
传真:0755-33217631
邮件:1173597030@qq.com
地址:广东深圳市龙岗区南湾街道下李朗社区平吉大道9号华熠大厦A区1211
产品详情
产品简介
QL355TP英国tti直流电源,英国tti QL355TP:Bench/System High Precision DC Power Supply, Linear Regulation, Digital Control 2 x 35/3A or 15V/ plus 1-6V/3A, USB/RS232/GPIB/LAN英国tti直流电源...
产品详细介绍
QL355TP英国tti直流电源,英国tti QL355TP:
英国tti直流电源
英国tti直流电源
英国tti直流电源
Bench/System High Precision DC Power Supply, Linear Regulation, Digital Co ntrol 2 x 35/3A or 15V/ plus 1-6V/3A, USB/RS232/GPIB/LAN
ntrol
The QL Series II is the latest and highest performance linear regulated power supply series from TTi.
Single and triple output models are available. Each model can be specified with or without digital remote co ntrol interfaces.
Each main output provides more than 100 watts of power, and dual range capability offers higher currents at lower voltages.
New features include an enhanced auxiliary output with fully variable voltage and higher current capability on T models, and an LXI compliant LAN interface on all P models.
QL355TP英国tti直流电源,英国tti QL355TP:
QL355TP英国tti直流电源,英国tti QL355TP:
TECHNICAL SPECIFICATIONS
QL355TP英国tti直流电源,英国tti QL355TP:
QL355TP英国tti直流电源,英国tti QL355TP:
QL355TP英国tti直流电源,英国tti QL355TP:
QL355TP英国tti直流电源,英国tti QL355TP:
QL355TP英国tti直流电源,英国tti QL355TP:
QL355TP英国tti直流电源,英国tti QL355TP
Accuracy specifications apply for the temperature range 18°C to 28°C after one hour warm-up.
Thurlby Thandar Instruments Ltd. operates a policy of co ntinuous development and reserves the right to alter specifications without prior notice.
如果您觉得“QL355TP 英国tti直流电源”描述资料不够齐全,请联系我们获取详细资料。(联系时请告诉我从仪器交易网看到的,我们将给您最大优惠!)
本页链接:http://www.yi7.com/com_sdongjin/sell/itemid-7177699.html
已经有1642位访客查看了本页.
英国tti直流电源
英国tti直流电源
英国tti直流电源
Bench/System High Precision DC Power Supply, Linear Regulation, Digital Co
- Advanced dc power supplies, single or triple output
- Up to 112 watts per output
- Very high precision, very low noise, excellent dynamics
-
Advanced user interface with numeric and rotary co
ntrol - Multiple voltage/current ranges for increased flexibility
- Multiple non-volatile memories for power supply set-ups
- Switchable remote sense provides perfect load regulation
- Comprehensive protection including OVP and OCP trips
- Compact bench footprint; modular width for rack mounting
-
Auxiliary output fully variable 1.00V to 6.00V at 3A with selec
table voltage and current metering (T models) - Bus programmable via USB, RS232, GPIB or LAN (P models)
- LAN interface is LXI compliant
- Duplicate power and sense terminals at rear (P models)
Single and triple output models are available. Each model can be specified with or without digital remote co
Each main output provides more than 100 watts of power, and dual range capability offers higher currents at lower voltages.
New features include an enhanced auxiliary output with fully variable voltage and higher current capability on T models, and an LXI compliant LAN interface on all P models.
QL355TP英国tti直流电源,英国tti QL355TP:
MODEL TABLE | ||||||
---|---|---|---|---|---|---|
MODEL | OUTPUTS | MAIN OUTPUTS | AUX OUT | MAX POWER | INTERFACES | TERMINALS |
QL355 | 1 | 0-35V/0-3A or 0-15V/0- | - | 105W | - |
Front o |
QL564 | 1 | 0-56V/0-2A or 0-25V/0-4A | - | 112W | - |
Front o |
QL355T | 3 | 2 x 0-35V/0-3A or 0-15V/0- | 1-6V/3A | 228W | - |
Front o |
QL564T | 3 | 2 x 0-56V/0-2A or 0-25V/0-4A | 1-6V/3A | 242A | - |
Front o |
QL355P | 1 | 0-35V/0-3A or 0-15V/0- | - | 105W | RS232/USB/GPIB/LAN | Front/Rear |
QL564P | 1 | 0-56V/0-2A or 0-25V/0-4A | - | 112W | RS232/USB/GPIB/LAN | Front/Rear |
QL355TP | 3 | 2 x 0-35V/0-3A or 0-15V/0- | 1-6V/3A | 228W | RS232/USB/GPIB/LAN | Front/Rear |
QL564TP | 3 | 2 x 0-56V/0-2A or 0-25V/0-4A | 1-6V/3A | 242A | RS232/USB/GPIB/LAN | Front/Rear |
QL355TP英国tti直流电源,英国tti QL355TP:
TECHNICAL SPECIFICATIONS
MAIN OUTPUT(S) | |
---|---|
QL355, QL355P, QL355T, QL355TP | |
Max. Output Power | 105 watts |
Output Ranges |
Range 1 - 0 to 35V, 0 to 3A Range 2 - 0 to 15V, 0 to Range 3 - 0 to 35V, 0 to 500.0mA |
QL564, QL564P, QL564T, QL564TP | |
Max. Output Power | 112 watts |
Output Ranges |
Range 1 - 0 to 56V, 0 to 2A Range 2 - 0 to 25V, 0 to 4A Range 3 - 0 to 56V, 0 to 500.0mA |
All Models | |
Voltage Setting | By floating point numeric entry or rotary jog wheel; resolution 1mV |
Current Setting | By floating point numeric entry or rotary jog wheel; resolution 1mA or 0.1mA depending on range |
Setting Accuracy |
Voltage - 0.03% ±5mV Current 0.2% ±5mA/0.5mA |
Output Mode |
Operation in co |
DC Output Switch | Sets output voltage and current levels to zero when Off |
Output Terminals | 4mm safety binding post terminals on 19mm (0.75") spacing. Duplicated on rear terminal block (P versions only) |
Load Regulation |
For any load change, at the output terminals, using remote sense, Voltage <0.01% + 2mV. Current <0.01% + 250µA; <0.01% +50µA on 500mA range. (Add typically 2.5mV for a 0.5V dro |
Line Regulation | Voltage <0.01% + 2mV for 10% change.Current <0.01% +250µA; <0.01%+ 50µA on 500mA range |
Ripple and Noise | Typically <0.35mV rms CV mode, and <0.2mA rms CI mode (<20µA rms on 500mA range) |
Common Mode Noise Current | <4µA rms at 20MHz bandwidth |
Transient Respo |
<20usec to within 15mV of setting for 90% load change |
Temperature Coefficient | <(50ppm+0.5mV)/ °C (voltage), <(100ppm+1mA/0.1mA)/°C (current) |
Remote Sense | Eliminates up to 0.5V drop per lead. Remote sense operation selected from front panel and indicated by LED |
Sense Terminals | Recessed sprung sockets for direct insertion of wires. Duplicated on rear terminal block (P versions only) |
OUTPUT PROTECTION | |
---|---|
Output Protection | Output will withstand forward voltages of up to 20V above rated output voltage. Reverse protection by diode clamp for currents up to 3A |
Fault Co |
The output will be shut down if any of the four trip co |
Over Voltage (OVP) | Settable 1V to 40V (QL355) or 60V (QL564) in 0.1V steps |
Over Current (OCP) | Settable 0.1A to 5. (QL355) or 4. (QL564) in 0.01A steps |
Over Temperature |
Mo |
Sense Error |
Mo |
Trip Output Signal | Isolated open-collector output signal on rear panel |
METERING | |
---|---|
Display Type |
Dual digital displays per output using 14mm (0.56") high brightness LEDs. 5 digits for voltage, 4 digits for current. Updat |
Meter Function |
Voltage meter shows set voltage when in CV mode and measured voltage when in CI mode. Current meter shows measured current when in CV mode and set current when in CI mode. |
Limits Display |
With the dc output switch set to Off, both meters show the set values (i.e. the limits). With the output On, either the voltage meter or current meter will show a measured value (depending on the CV/CI mode). Pressing the Limits button will provide a temporary display of the set values. |
Watts (VxA) Display | The voltage meter can be made to show the calculated product of voltage and current |
Meter Resolution | |
Voltage | 1mV (CV mode) or 10mV (CI mode) |
Current | 1mA or 0.1mA depending on range |
Power | 0.01W or 0.001W depending on range |
Meter Accuracy | |
Voltage | 0.1% of reading ±10 mV (CI mode) |
Current | 0.2% of reading ± 0.00 or 0.5mA (CV mode) |
Power | 0.3% of reading ± 0.05W or 0.005W |
SETTINGS MEMORIES | |
---|---|
Main Output(s) | Up to 50 set-ups per output can be saved and recalled via the keyboard or remote interfaces. |
Parameters Stored | Range, Set volts, Set current, OVP, OCP |
Recall system |
Settings are previewed o |
l |
On triple output models when in l |
Auxiliary Output | Up to 10 voltage settings can be saved and recalled via the keyboard or remote interfaces |
ALARM OUTPUT |
---|
Isolated rear-panel open-collector output signal. User can select output to be activated for either OVP, OCP, Overtemperature or Sense miswiring, or for any of those four faults. |
l |
---|
(Triple Output Models) Each output can be co l A Copy function is available which copies all of the settings for output 1 to output 2 (Range, Set volts, Set current, OVP, OCP). l (Note: l |
AUXILIARY OUTPUT | |
---|---|
(Triple Output Models) | |
Output Voltage | 1.00 to 6.00V |
Output Current | >3.0 A maximum. LED indication of over-current |
DC Output Switch | Sets output voltage level to zero when Off |
Setting Accuracy | 0.5% ±10mV |
Ripple and Noise | <2mV rms, 10mVp-p |
Load Regulation | < 1% for 90% load change |
Line Regulation | < 0.1% for 10% line change |
Meter Accuracy |
Voltage 0.5% ±10mV, Resolution 10mV Current 0.5% ±10mA, Resolution 10mA |
Output Regulation |
Switch-mode down co |
Output Protection | Output will withstand up to 16 V forward voltage. Diode clamped for reverse voltages and 1 Amps reverse current |
Output Terminals | 4mm safety binding post terminals on 19mm (0.75") spacing. Duplicate screwless terminals at rear (P versions only) |
DIGITAL BUS INTERFACES | |
---|---|
(P suffix versions only) Full remote co |
|
RS-232 | Standard 9-pin D connector. Baud rate variable 600 to 19,200 |
USB |
USB 2.0 co |
GPIB (IEEE-488) |
The interface co |
Ethernet (LAN) |
Standard 10/100 ba |
LXI Compliance | LAN interface is compliant with LXI class C. (LXI is the abbreviation for Lan eXtensions for Instrumentation). |
DIGITAL PROGRAMMING PERFORMANCE | |
---|---|
(P versions only) | |
Voltage Setting - Main Output(s) | |
Resolution/Accuracy | 1mV / ± (0.03% +5mV) |
Current Setting - Main Output(s) | |
Resolution/Accuracy | 0.1mA / ± (0.2% +5mA) or 0.01mA / ± (0.2% +0.5mA) on 500mA range |
Voltage Setting - Auxiliary Output (Triple Output Models) | |
Resolution/Accuracy | 10mV / ± (0.5% +10mV) |
Programming Speed | |
Command Delay | Typically <25ms (this must be added to any of the figures below) |
Voltage Up Time | <10ms* to 1% |
Voltage Down Time | <40ms* to 1% (full load); <0.6s* to 1% (no load) |
* The up and down times vary with range and voltage step size. More information is co |
QL355TP英国tti直流电源,英国tti QL355TP:
DRIVER SOFTWARE SUPPLIED (P versions only) | |
---|---|
IVI Driver |
An IVI driver for Windows is supplied. This provides support for common applications such as LabView*, LabWindows*, HPVEE* etc. |
USB Driver | An installation file is supplied which calls a standard Windows* USB driver. |
* LabView and LabWindows are trademarks of Natio HPVEE (now Agilent VEE) is a trademark of Agilent Technologies. * USB interface is supported for Windows 2000, XP, Vista and Windows 7. Further versions will be supported as they are released. Windows is a trademark of Microsoft. |
KEYBOARD & ROTARY Co |
---|
All functions, including the selec |
GENERAL SPECIFICATIONS | |
---|---|
AC Input | 230V AC or 115V AC ± 10%, 50/60HzInstallation Category II |
Input Power |
Single - 250VA max. Triple - 500VA max |
Temperature & Enviro |
|
Operating Range | +5°C to +40°C, 20% to 80% RH |
Storage Range | -40°C to + 70°C |
Enviro |
Indoor use at altitudes up to 2000m, Pollution Degree 2 |
Cooling | Intelligent variable-speed fan. Over-temperature trip shuts down output if internal temperatures exceed predetermined thresholds. |
Safety & EMC | |
Safety | Complies with EN61010-1 |
EMC | Complies with EN61326 |
PHYSICAL | |
---|---|
Size | |
(size excludes feet, knobs and terminals) | |
Single | 140 x 160 (1/3 rack, 4U) x 290mm |
Triple | 280 x 160 (2/3 rack, 4U) x 290mm |
Weight | |
Single | 5.5kg (12lb) |
Triple | 10.5kg (23lb) |
OPTIONS | |
---|---|
Rack Mount | RM410 19 inch 4U mount for up to three single output units or one triple plus one single. Blanking plates are supplied for unused sections. |
Accuracy specifications apply for the temperature range 18°C to 28°C after one hour warm-up.
Thurlby Thandar Instruments Ltd. operates a policy of co
如果您觉得“QL355TP 英国tti直流电源”描述资料不够齐全,请联系我们获取详细资料。(联系时请告诉我从仪器交易网看到的,我们将给您最大优惠!)
本页链接:http://www.yi7.com/com_sdongjin/sell/itemid-7177699.html
已经有1642位访客查看了本页.
产品咨询
相关产品推荐
相关技术文章
- icon 日本德士可编程直流电源的应用领域及
- icon 英国tti直流电源基础知识介绍
- icon 可编程直流电源是怎么工作的?这几点很重要!
- icon Aim-tti MX180TP 新产品 三通道可编程电源
- icon Aim-tti MX100QP新产品 四通道可编程直流电源