美国伊顿三通插装阀,插装阀选型指南
产品简介
美国伊顿三通插装阀,插装阀选型指南这些应用包括压铸、深拉伸压机、注塑机、集装箱搬运、链斗装载机、林业机械和自卸卡车。在已经确定的 ISO 7368 (DIN 24342)插装阀中增加 HFV 阀,Vickers 进一步提高了已经很丰富的产品系列。...
产品详细介绍
美国伊顿三通插装阀,插装阀选型指南
HFV(液压反馈 Valvistor )系列盖板插装
阀靠一个电流控制 PWM 信号利用自调节
液压设计来控制流量,该设计实现对主阀
芯的伺服型控制而不用电反馈传感器。
The structure and characteristics of this valve opens up the hydraulic cylinder and the motor
Of the wide range of applications. These applications include die casting,
Deep drawing press, injection molding machine, co ntainer handling, chain bucket
Loaders, forestry machinery and dump trucks.
Insert the ISO 7368 (DIN 24342) already identified
Valve added HFV valve, Vickers further improved
Has a very rich product line.
美国伊顿三通插装阀,插装阀选型指南
打开先导节流阀(图 2)降低容腔(3)中的
压力,使主阀芯离开其阀座运动。
主阀芯向上运动直到窄槽和先导阀压降影
响阀芯上的力平衡,这时阀芯处于稳态工
况,穿过窄槽和先导阀的流量相等。
HFV (hydraulic feedback Valvistor) series cover plate
The valve is co ntrolled by a current co ntrol PWM signal using self-regulation
Hydraulic design to co ntrol the flow, the design to achieve the main valve
Core servo type co ntrol without electric feedback sensor.
这种阀的结构和特征开辟了液压缸和马达
的广泛的应用领域。
The main spool moves upward until the narrow slot and pilot valve are down
The balance of the force on the spool, then the spool in the steady state workers
Condition, through the narrow slot and the pilot valve flow equal.
Open the pilot throttle (Figure 2) to lower the cavity (3)
这使窄槽掠过节流棱边(7),打开可变阻尼口并使流量经过控制回路。
初,经过先导阀的流量等于经过窄槽的流量加上由于主阀芯开启运动而排出的流量。
Pressure, so that the main spool away from its seat movement. This makes it narrow
Slot the throttled edge (7), open the variable damping port and make it
The flow passes through the co ntrol loop. Initially, through the pilot valve
The flow rate is equal to the flow through the narrow slot plus the main spool
Turn on the movement and discharge the traffic.
美国伊顿三通插装阀,插装阀选型指南
如果您觉得“美国伊顿三通插装阀,插装阀选型指南”描述资料不够齐全,请联系我们获取详细资料。(联系时请告诉我从仪器交易网看到的,我们将给您最大优惠!)
本页链接:http://www.yi7.com/com_shqt8808/sell/itemid-7444106.html
已经有1496位访客查看了本页.
HFV(液压反馈 Valvistor )系列盖板插装
阀靠一个电流控制 PWM 信号利用自调节
液压设计来控制流量,该设计实现对主阀
芯的伺服型控制而不用电反馈传感器。
The structure and characteristics of this valve opens up the hydraulic cylinder and the motor
Of the wide range of applications. These applications include die casting,
Deep drawing press, injection molding machine, co
Loaders, forestry machinery and dump trucks.
Insert the ISO 7368 (DIN 24342) already identified
Valve added HFV valve, Vickers further improved
Has a very rich product line.
美国伊顿三通插装阀,插装阀选型指南
打开先导节流阀(图 2)降低容腔(3)中的
压力,使主阀芯离开其阀座运动。
主阀芯向上运动直到窄槽和先导阀压降影
响阀芯上的力平衡,这时阀芯处于稳态工
况,穿过窄槽和先导阀的流量相等。
HFV (hydraulic feedback Valvistor) series cover plate
The valve is co
Hydraulic design to co
Core servo type co
这种阀的结构和特征开辟了液压缸和马达
的广泛的应用领域。
The main spool moves upward until the narrow slot and pilot valve are down
The balance of the force on the spool, then the spool in the steady state workers
Condition, through the narrow slot and the pilot valve flow equal.
Open the pilot throttle (Figure 2) to lower the cavity (3)
这使窄槽掠过节流棱边(7),打开可变阻尼口并使流量经过控制回路。
初,经过先导阀的流量等于经过窄槽的流量加上由于主阀芯开启运动而排出的流量。
Pressure, so that the main spool away from its seat movement. This makes it narrow
Slot the throttled edge (7), open the variable damping port and make it
The flow passes through the co
The flow rate is equal to the flow through the narrow slot plus the main spool
Turn on the movement and discharge the traffic.
美国伊顿三通插装阀,插装阀选型指南
如果您觉得“美国伊顿三通插装阀,插装阀选型指南”描述资料不够齐全,请联系我们获取详细资料。(联系时请告诉我从仪器交易网看到的,我们将给您最大优惠!)
本页链接:http://www.yi7.com/com_shqt8808/sell/itemid-7444106.html
已经有1496位访客查看了本页.