提交询价信息 |
发布紧急求购 |
价格:电议
所在地:上海
型号:[TANAKA]ACR-M3微量法自动残炭试验仪
更新时间:2011-07-06
浏览次数:1343
公司地址:上海市闸北区万荣路388弄17号904室
周峰(先生)
上海旭风科学仪器有限公司
主要生产先进的自动化石油仪器、同时代理日本进口化工产品、化工试剂及ASTM标准试样等业务。至目前为止本公司的业务始终保持持续稳定的增长态势,业务更遍及上海、京津、西北、东北、华东、华中、华南等地的石油化工、民航商检、电力系统、糖酒生产企业。为创立信誉第一的企业品牌,本公司坚持以“优质的产品质量、满意的产品价格、跟踪式的售后服务”为企业宗旨,向使用单位提供仪器的安装调试、使用培训、售后维修等服务,精益求精的工作态度深深的赢得了广大用户的一致好评。上海旭风科学仪器有限公司借助日本京都电子制作株式会社的设计理念及日本的进口零部件为主体,组装生产各类符合国家及ASTM标准要求的石油化工类分析仪器设备。进一步保证了所生产的仪器的优良性能及优惠的售价,从而为更好的长期业务合作提供了坚实的信誉基础,同时也为日后公司的更好发展迈出了关键一步。
本公司在提供技术产品的同时,还非常重视售后服务,其中主要包括:
提供专业的售前咨询、协助选型、仪器观摩
安装调试、现场培训
售出仪器设备均免费保修一年
保修期后负责常年维修,提供零配件及消耗品
ACR-M3 is a tester to be used for the determination of the amount of carbon residue formed after evaporation and pyrolysis of petroleum material under certain conditions and is intended to provide some indication of the relative coke forming tendency of such materials.
ACR-M3自动微量法残炭测试仪是测试石油产品残炭含量的专用仪器。残炭是石油产品或原料经过高温分解后的残留物质,而残炭含量是判定石油产品或原料的组份的重要指标之一。
Note-
Micro Method offers advantages of better control of test conditions, smaller samples, and less operator attention compared to Conradson
Carbon Residue test to which it is equivalent.
Up to twelve samples may be run simultaneously including a control sample.
微量残炭法是经典型康氏残炭法的更新换代方法。称重样品在惰性气流保护下的高温加热到500℃,并保持一定的时间,再称量出试验过程后的残留的组份,与原样品重量的比值就是样品的残炭量。相比较于康氏残炭法,微量法试验的试验条件,试验环境更容易掌控,试验结果的重复性和再现性非常好,样品用量也小。相关的试验规程上已经确定了微量残炭法测定结果与常规的Conrachson(康氏残炭法)的残炭测定结果相一致。按规定,微量法试验多可一次测试12个样品。
SMALL SAMPLE: Test can be run with a small quantity of sample (0.15 to 1.5g for small vials, 3.0g for medium vials and 5.0g for large vials, depending on carbon residue content).
试验样品需求量很少:仪器每次能测定6~12个样品(大样品管6个,或小/中样品管12个),加热过程自动控制,同样品测试重复性非常高。(取样量:小样品管0.15 - 1.5g ;中样品管3.0g ;大样品管5.0g)
EASY OPERATION: Test automatically proceeds exactly as prescribed by simply pushing the START switch. Pressure controller (2nd stage regulator) and solenoid valve supply constant pressure. No fine tuning is required after test starts. The buzzer sounds intermittently for 10 seconds when the process is finished. 操作简单:仪器操作十分简单,操作时仅需按动“启动”键,一切均由仪器严格按照标准程序自动进行测试, 无需任何人员操作和判断。试验过程结束后,仪器自动电子音讯10秒以提示用户处理。
EQUIPPED WITH GAS FLOW METER: With the N2Gas flow meter and needle valve fitted on the front panel, process parameters can be easily checked and calibrated. 仪器本体前方自带浮子流量计,流量控制显示清楚直观,也可用于日常维护中的计量校验。
VINYL LAMINATED TRAP: The condensate trap is equipped on the front of the tester. Thanks to this, the condensate volume is easy to confirm and the trap easily attaches and detaches. Trap jar is vinyl laminated for the safety. 废气由加热炉下方专用的耐温防爆冷凝瓶收集,拆卸简单后,容易清洗。
EXCELLENT REPEATABILITY/REPRODUCIBILITY: Repeatability and reproducibility are excellent. Since the electronic temperature control is far more precise compared to that of Conradson method’s. 微量法试验的重复性和再现性非常好,其测定结果与常规的Conrachson(康氏法)残炭测定结果相一致。
TANAKA Micro Carbon Residue Tester, model ACR-M3
SPECIFICATIONS:
CONFORMING STANDARDS: (适用标准)
ISO 10370, ASTM D4530, GB/T 17144 etc.
COKING OVEN: (加热炉)
with circular heating chamber, 85mm diameter by 105mm deep, made of stainless steel Heater: Pipe type, 700W x 2, made of stainless steel Heating Range: Up to 500℃ 全不锈钢制,双层壳体加热炉,(Φ85x105 mm) 双环型电加热丝,功率700W x 2,试验温度要求 500℃
PROCESS CONTROLLER: (程序控制)
Digital Programmable Controller, model PC-935 可编程数控仪PC-935
THERMOCOUPLE: (温度检测)
JIS J-type (Fe-Constantan) 热电偶检测
PRESSURE CONTROLLER (2nd stage regulator): 压力控制(2段式调节)
Primary Pressure: 1400kPa max. 总压力阀:限压1400kPa
Control Range: 20 to 750kPa (usually 150kPa)压力调节阀:20-750kPa可调 (限压150kPa)
FLOW METER: 流量计
0.1 to 1L/min 0.1 – 1升/分钟
FLOW RATE: 流量控制
Automatically regulated at 150ml/min and 600ml/min, According to ASTM D4530
按ASTM D4530试验规程要求。自动切换150ml/min 和 600ml/min 的流量控制。
CONDENSATE TRAP: 废气冷凝
200ml vinyl laminated glass jar with threaded mouth 专用的(螺口)耐温防爆冷凝瓶(废液瓶)
SAFETY: (安全保护)
The tester stops operation with the secondary pressure less than 80kPa programmable controller cuts the heater output and sounds buzzer continuously when the oven is abnormally heated above 550 ℃. Further more, a separate circuit performs the same function when the oven heated above 600 ℃. 外接氮气压力小于80kPa或加热炉温度超过550 ℃时,仪器停止加热并报警提示。加热炉温度超过600 ℃时,仪器直接停止动作并报警提示。
DIMENSION & WEIGHT: (体积/重量)
350W x 390D x 460H (mm), 21kg
UTILITY AND OTHERS: POWER SUPPLY: (电源需求)
AC100/120V or 220/240V 50/60Hz 1.6kW(max)
UTILITY AND OTHERS (continued): N2GAS SUPPLY: 需要外接氮气支持
From bomb or piping, 200-500kPa Inlet: 10mm diameter, hose nipple (Consumption: Approx. 40L of N2Gas/test) 氮气可通过氮气瓶或管道供给,要求氮气压力为200-500kPa(一次试验大约消耗40升氮气)
EXHAUST: 安置要求
To be placed to a ventilator or fume hood Exhaust Outlet:10mm diameter, hose nipple
仪器需要安放在通风橱内或通过废气管(Φ10mm)连接到室外
OTHERS: (残炭分析配合联用)
An analytical balance 分析天平
ORDERING INFORMATION:
STANDARD ACCESSORIES: (标准附件)
1. Small Vials (100/box)小样品管(100个装) |
1box |
2. Large Vials (50/box) 大样品管( 50个装) |
1box |
3. Holder for Small Vials小样品管支架(12孔) |
1pc |
4. Holder for Large Vials大样品管支架(6孔) |
1pc |
5. Hook 取样钩 |
1pc |
6. Condensate Trap 废液瓶(冷凝瓶) |
1pc |
7. Oven Seal Lid 加热炉盖 |
1pc |
8. AC Power Cord, 3.0m (电源线 |
1pc |
9. Braided Hose for N2Gas (3m) 耐压管 |
1pc |
10. Wire Band for N2Gas耐压管夹 |
2pcs |
11. Rubber Hose for Exhaust (5m) 废气管 |
1pc |
12. Hose Band for Exhaust废气管夹 |
1pc |
13. Instruction Manual 使用说明书 |
1copy |
OPTIONAL ACCESSORIES:(选购件)
1. Medium Vials (50/box): Test for ISO 10370 中样品管(50个装/符合ISO 10370试验规定)
2. Holder for Mixed Vials (small/medium x 6 and Large x 3)
样品管支架(小/中样品管*6孔 +大样品管*3)
3. 1st Stage Regulator for nitrogen gas bomb : 外接氮气的压力调节筏
model RY-70V
Primary Pressure: 15000kPa max.
Control Range: 0 to 600kPa
Screw size: OUT M16 x 1.5 hexagon cap nut
残炭量和取样量的关系
残炭量(%) |
<1 |
1-5 |
>5 |
取样量(g) |
5.0±0.5 |
0.5±0.1 |
0.15±0.05 |