提交询价信息
发布紧急求购
您好,欢迎来到仪器交易网!手机版|本站服务|添加收藏|帮助中心
您所在的位置: 仪器交易网 » 供应 » 仪器配件 » 阀/接头 » lik 进口波纹管式疏水阀

lik 进口波纹管式疏水阀

德国莱克国际集团广州总代理
会员指数: 企业认证:

价格:电议

所在地:广东 广州市

型号:lik

更新时间:2012-09-05

浏览次数:1339

公司地址:广州市黄埔工业区633号

孙先生(先生) 经理 

产品简介

进口波纹管式疏水阀产品描述德国莱克(LIK)进口波纹管式疏水阀的热敏元件为注满易挥发液体的波纹管,利用液体的易挥发性和波纹

公司简介


进口阀门站①:
阀门站②:
德国莱克集团成立于1972年,总部位于巴伐利亚州的Burghausen,是一个集工程及阀门生产于一体的企业,为客户提供专业的过程自动化及控制设备等解决方案。一直以来,莱克集团稳步发展,经过三十多年的积累,莱克集团已经迈入了国际化公司的行列。如今莱克集团在欧洲和亚洲有若干个分公司,并拥有数间生产高端产品和系统的子公司。
德国莱克(LIK)阀门重视客户提出的每一个要求,并按照客户提出的要求量身定做,力求为客户提供最好的解决方案,同时也能优化产品性能,客户感到很满意且与他们保持紧密的合作关系。我们坚持这样做并取得了成功,这是我们发展的动力。自从德国莱克(LIK-VALVE)阀门诞生的那一刻起,我们就继承了德国传统的苛刻的制造精神,我们力求每一个环节都做到精益求精,所以我们的质保系统渗透到每一个工序,确保每个工人用到的是最好的零配件,这是我们发展的根本。
基于莱克(LIK)阀门业务在中国的发展和壮大,莱克集团于2000年在广州设立了第一个办事处,同年在香港设立亚洲总部-莱克集团亚洲有限公司。2000年设立了广州分公司,为国内客户提供更方便快捷的服务。同时莱克集团在中国的员工全部需要不定期的送到德国总部进行培训,因此他们能够运用先进的技术为国内客户提供高品质的服务。
一直以来,为用户量身定做,提供我们最有竞争力的莱克(LIK)阀门解决方案是我们的目的和行动指南。我们长期关注市场并贴近客户,您完全可以信赖我们莱克(LIK)阀门品牌,及其专业的技术服务团队。我们的战略是集中全球优势满足当地客户的需求。
我们相信莱克(LIK)阀门能够为客户提供最好的价值!
展开

产品说明


进口波纹管式疏水阀
产品描述
德国莱克(LIK)进口波纹管式疏水阀的热敏元件为注满易挥发液体的波纹管,利用液体的易挥发性和波纹管伸缩性。当蒸汽管线升温时,液体挥发成气体体积膨胀并产生压力推动着波纹管伸长,蒸汽管线降温达到易挥发的液体从气体转变成液体时体积缩收,波纹管内没有推动力,波纹管缩收。
Bellows seal trap
The thermo-sensitive element of bellows seal traps is bellows filled with volatile liquid, which employs the volatility of the liquid and flexibility of the bellows. When temperature of the steam pipe goes up, the liquid volatilizes into gas, the size expands and produces pressure to impel bellows to stretch. In contrast, when temperature of the steam pipe goes down to the temperature for gas to turn into liquid, the size gets smaller and the bellows contract due to lack of impetus.
优点:
1、排水温度可以调节在70~100度之间,使用方便。
2、能够阻止高温凝结水的排放,保持蒸汽管线的热能。
3、连续排水,没有噪音。
4、蒸汽压力小波动不影响使用。
5、结构简单,体积小,安装方便、随意。
6、通过增加波纹管直径提高凝结水的排量。
7、具有良好的排空气性能,不怕冻。
8、零泄漏,背压率达到75%。
Merits
1.Convenient use due to adjustable water discharge temperature ranging from 70 to 100 degrees.
2.Capability to prevent discharge of high-temperature condensate so as to maintain heat energy of the steam pipe.
3.Continuous water discharge without noise.
4.Free from the effect of small fluctuation of steam pressure.
5.Simple structure, small size and easy installation.
6.Improvement of discharge capacity of condensate by increasing diameter of bellows.
7.Good air discharge performance with resistance to coldness.
8.Zero leakage and backpressure ratio up to 75%.
安装、使用注意事项:
  安装前管路应用蒸汽吹除污物。箭头所示方向与流向一致。
  疏水阀前热力管应有1~2米不必保温。应安装在低于用汽设备凝结水排出点的地方。
  该阀出厂前疏水温度已调节在95℃左右,如果需要改变疏水温度或排水量时,可打开防护帽,松开锁紧螺母,旋转调节螺钉,顺时针旋转阀芯前进,疏水量减少,疏水温度降低;逆时针旋转,阀芯后退,疏水量增大,疏水温度上升。调整后,就将锁紧螺母拧紧。
  要定期保养,清除过滤网前的污物,保证疏水阀正常工作。
Installation/attention for use
Before the installment of pipeline, use the steam to blow off the pollutant. The arrow shows the direction consistent with the flow direction.
Ahead of the trap, the thermal tube of 1~2 meters need no heat-preservation. Be installed at the position lower than the condensation water discharge point of the steam-using equipment.
Before leaving the plant, the hydrophobic temperature of trap has been adjust around 95. If it is needed to change the hydrophobic temperature or the displacement, open the shielding bonnet, loosen the lock nut, revolve the adjusting screw revolve the valve core clockwise, the hydrophobic volume reduces and the hydrophobic temperature drops; revolve it counterclockwise, the valve core backlashes, the hydrophobic volume increases, and the hydrophobic temperature rises. After the adjustment ended, tighten the lock nut.
It is needed to make the periodic maintenance and clear the pollutant before the filtration screen, so as to guarantee the trap work normally.
技术参数/Technique parameter

壳体压力等级
Shell pressure grade
zui大工作压差
Maximum operating pressure differential
zui高允许温度
Maximum allowable temperature
允许背压率
Permitted backpressure rate
1.6、2.5MPA
1.6MPA
220℃
75%

抗水击
Resist
排空气装置
Air exhaust system
使用介质
Used medium
节能效果
Energy saving effect
负荷泄漏率
Load leakage rate
适应
Adaption
自动
Automatic
蒸汽、凝结水
Steam、condensate water
Excellence
0%

主要零件材料/The materials of primary accessories

零部件名称Part and component name
材质Material
阀体、阀盖Valve body、Valve cover
碳钢、不锈钢Carbon steel、Stainless steel
液囊Reservoir
不锈钢和易挥发液体Stainless steel、Volatile liquid
阀座Valve seat
高铬不锈钢、四氟High chrome stainless steel、Four Fluorine
过滤网Filtrating screen
不锈钢Stainless steel


|销售: 61132877 | :32398971 |技术部:

Email:

德国莱克阀门有限公司地址:广州市黄埔东路633号

本页产品地址:http://www.yi7.com/sell/show-1785176.html
免责声明:以上所展示的[lik 进口波纹管式疏水阀]信息由会员[德国莱克国际集团广州总代理]自行提供,内容的真实性、准确性和合法性由发布会员负责。
[仪器交易网]对此不承担任何责任。
友情提醒:为规避购买风险,建议您在购买相关产品前务必确认供应商资质及产品质量!

发布询价单

厂商其他产品

您最近浏览过的产品

没有合适的产品?是否在线询价?
询价标题
联系人
电话
主要内容
验证码