Huace-300 膏体体积电阻率测定仪

北京华测液体体积电阻率测试仪

Beijing Hua measurement of liquid volume resistivity tester

一、北京华测液体体积电阻率测试仪符合标准：

Beijing Hua measurement of liquid volume resistivity tester standard:

GB/T 1410-2006 《 固体缘材料体积电阻率和表面电阻率试验方法》

GB/T 1410-2006 " solid volume resistivity and surface resistivity test method "

ASTM D257-99 《缘材料的直流电阻或电导试验方法》

" ASTM D257-99 DC resistance or conductance of insulating materials test method "

GB/T 2439-2001《硫化橡胶或热塑性橡胶 导电性能和耗散性能电阻率的测定》

GB/T 2439-2001 " rubber vulcanized or thermoplastic conductive performance and dissipative properties - Determination of the electrical resistivity of "

GB/T 10581-2006 《缘材料在高温下电阻和电阻率的试验方法》

GB/T 10581-2006 " insulating materials at high temperature resistance and resistivity of the test method "

GB/T 1692-2008 《硫化橡胶缘电阻率的测定》

GB/T 1692-2008 " vulcanized rubber - - Determination of insulation resistance "

GB/T 12703.4-2010 《纺织品 静电性能的评定 第４部分：电阻率》

GB/T 12703.4-2010 " Textile - evaluation for electrostatic properties - Part fourth: resistance "

GB/T 10064-2006《测定固体缘材料缘电阻的试验方法》

GB/T 10064-2006 " determination of the insulation resistance of solid insulating materials test method "

GB1672-88《液体增塑剂体积电阻率的测定 》

GB1672-88 " liquid plasticizers -- Determination of volume resistivity "

二、北京华测液体体积电阻率测试仪产品介绍

Beijing Hua measurement of liquid volume resistivity tester product introduction

表面、体积电阻率测定仪完全符合并优于标准GB1672-88《液体增塑剂体积电阻率的测定 》，GB/T 1410-2006《固体缘材料体积电阻率和表面电阻率试验方法》和美国标准ASTM D257《缘材料的直流电阻或电导试验方法》等标准的要求。其准确度优于标准要求的几倍甚至10 倍以上(标准GB/T1410-2006《固体缘材料体积电阻率和表面电阻率试验方法》对度的规定为低于1010Ω为±10%, 更高电阻时为±20%。)。本仪器既可测量高电阻，又可测微电流。采用了集成电路，测量精度达到3‰。同时仪器体积小、重量轻、本仪器具有精度高、显示迅速、性好稳定、读数方便等优点。数字液晶直接显示电阻值和电流。量程从0.01×104Ω ～1×1018 Ω，是目前测量范围宽，准确度zui高的数显式缘材料电阻率测量仪器。电流测量范围为2×10-4 ～1×10-16Ａ。测试电压为10/50/100/V 任意可调。适用于防静电产品如防静电鞋、防静电塑料橡胶制品、计算机房防静电活动地板等电阻值的检验以及缘材料和电子电器产品的缘电阻测量。

HEST200 surface, volume resistivity measuring instrument is fully consistent with and better than the national standard GB1672-88 " liquid plasticizers -- Determination of volume resistivity ", " GB/T 1410-2006 of solid insulating materials methods of test for volume resistivity and surface resistivity " and American Standard ASTM D257 " insulating materials test methods for DC resistance or conductance of " and other standards. Its accuracy is better than the national standard requirements several times or even 10 times more than the national standard GB/T1410-2006 " ( solid volume resistivity and surface resistivity test method for precision of the provisions of " less than 1010Ω± 10%, higher resistance to ± 20%. ). The instrument can measure high resistance, and measuring current. Using the new integrated circuit as well as our unit 's patented technology. Measurement precision reaches 3. The instrument has the advantages of small size, light weight, this instrument has the advantages of high precision, good stability, showing a rapid, easy reading. Digital liquid crystal display resistance and current. Range from 0.01× 104 Ω～ 1× 1018 Ω, is currently the most wide measurement range, the most accurate digital display type insulating material resistivity measuring instrument. Current measurement range of 2× 10-4 ～ 1× 10-16A. Test voltage is 10/50/100/V adjustable. Applied to anti-static products such as anti-static shoes, anti-static plastic rubber products, computer room anti-static floor activities such as the resistance value of the test as well as insulating materials electrical and electronic products insulation resistance measurement.

三、北京华测液体体积电阻率测试仪技术指标

Beijing Hua measurement of liquid volume resistivity tester technical indicators

1．电阻测量范围： 0.01×104Ω ～1×1018Ω。

The 1 resistor measurement range: 0.01× 104 Ω～ 1× 1018 Ω.

2．电流测量范围: 2×10-4A～1×10-16A

The 2 current measurement range: 2× 10-4A ～ 1× 10-16A

3． 显 示 方 式：数字液晶显示

The 3 display mode: Digital LCD display

4． 内置测试电压：10V、50V、100V、250、500、1000V

4 built-in test voltage: 10V, 50V, 100V, 250, 500, 1000V

5． 基本准确度：3‰

5 basic accuracy: 3 ‰

6．使用环境: 温度：0℃～40℃，相对湿度<80%

6: use environment temperature: 0℃ ~ 40 ℃, relative humidity <80%

7． 机内测试电压: 10/50/100/V 任意切换

7 built-in test voltage: 10/50/100/V arbitrary switching

8．供电形式: AC 220V，50HZ，功耗约5W

The 8 power supply forms: AC 220V, 50HZ, power consumption isabout 5W

9． 仪器尺寸: 285ｍｍ× 245ｍｍ× 120 mm

Instrument size: 9 285mm× 245mm× 120 mm

10．质量: 约2.8KG

10 quality:about 2.8KG

四、北京华测液体体积电阻率测试仪典型应用

Beijing Hua measurement of liquid volume resistivity tester typical application

1．测量防静电鞋、导电鞋的电阻值

1 measurements of anti-static shoes, conductive shoes resistance value

2、测量防静电材料的电阻及电阻率

2, measurement of the antistatic material resistance and resistivity

3、测量计算机房用活动地板的系统电阻值

3, measurement computer room with movable floor system resistance

4、测量缘材料电阻(率)

4, measurement of insulation resistance ( rate)

5、光电二管暗电流测量

5, photodiode dark current measurement

6、物理,光学和材料研究

6, physics, optics and materials research

7、高分子材料表面体积电阻率测定

In 7, the surface of the polymer volume resistivity

8. 液体增塑剂体积电阻率的测定

The 8 liquid plasticizers -- Determination of volume resistivity

五、北京华测液体体积电阻率测试仪标准配置：

Beijing Hua measurement of liquid volume resistivity tester standard configuration:

1、测试仪器：1 台

1, testing equipment : 1 sets

2、电源线： 1 条

2, power line: 1

3、测量线： 3 根（屏蔽线、测试接线、接地线）

3, measuring line: 3 ( shielding line, testing line, earth wire )

4、屏蔽箱

In 4, a shielding box

5、三电

In 5, the three electrode

6、合格证

6, certificate

7、说明书

膏体体积电阻率测定仪
膏体体积电阻率测定仪
膏体体积电阻率测定仪