ZY6017C汽车内饰材料燃烧试验机
Auto interior materials combustion testing machine
名称 ：ZY6017C汽车内饰材料燃烧试验机
详细介绍 Detailed introduction
此机符合GB8410、美标FMVSS571.302、DIN7520《汽车内饰材料的燃烧特性》。将试样水平地夹在U形支架上，在燃烧箱中用规
定高度火焰点燃试样的自由端15S后，确定试样上火焰是否熄灭，以及试样燃烧的距离和燃烧该距离所用的时间。内饰材料包
括汽车内饰领件所用的单一材料或层积复合材料，如座垫、座椅靠背、座椅套、安全带、头枕、扶手、活动式折叠车顶、所有
装饰性衬板、仪表板、杂物箱、室内货物架板、或后窗台板、窗帘、地板覆盖物…..
This machine meet GB8410, FMVSS571.302, DIN7520 combustion characteristic of auto interior materials. The
sample clip on the u-shaped bracket horizontally, in the burning box gauge is used
Set the height of flame lit the free end of the sample after 15 s, determine whether the sample on the flame
extinguished, and sample distance and combustion the time required for the distance. Interior materials bag
Enclosed led automotive interior parts used in a single material or laminated composites, such as seat
cushion, seat, seat cover, seat belts, headrest, armrest, activity type folding roof, all
Decorative plate, instrument panel, glove box, indoor cargo plane board, or rear window bedplate, curtains,
floor coverings... ..
一、燃烧箱：Combustion cases:
1、镜面不锈钢板结构，钢板厚度1.2mm
2、燃烧室尺寸：宽x高x深: 385x 360 204mm
3、底部有10个直径为19mm的通风孔，四壁靠近顶部四周有宽13mm的通风槽。
4、试验支架：由两块U形耐腐蚀的金属钢板制成，尺寸长x宽为361x100mm
1, mirror stainless steel structure, steel plate thickness of 1.2 mm
2, the size of the combustion chamber: width x height x deep: 385 x 360 x 204 mm
3, there are 10 19 mm diameter at the bottom of the hole, there are 13 mm wide near the walls near the top of
ventilation slots.
4, test support: the two pieces of u-shaped corrosion resistance of the metal steel plate, the size is 361
x100mm length x width
二、控制箱:Control box:
1、燃烧时间：0~99.99/S/M/H任意设定
2、停燃时间：燃烧时间：0~99.99/S/M/H任意设定
1, the burning time: 0 ~ 99.99 / S/M/H set arbitrary
2, stop burning time, burning time: 0 ~ 99.99 / S/M/H set arbitrary
三、燃烧灯：Burning lamp:
1、喷嘴内径：9.5mm
2、气源：煤气（客户自备）
3、火焰高度：38mm
1, the nozzle diameter: 9.5 mm
2, air supply: the gas () by advertisers
3, flame height: 38 mm
本页产品地址：http://www.yi7.com/sell/show-4360005.html
免责声明：以上所展示的[ ZY6017C 汽车内饰材料燃烧试验机]信息由会员[东莞中诺台湾质检仪器设备有限公司]自行提供，内容的真实性、准确性和合法性由发布会员负责。
| 传真：(0571)81021183 | 邮箱：info#yi7.com (请用"@"替换"#")
