ZY6054C手动卧式测试台
Manual horizontal test bed
一、规格参数：Specification:
1.zui大负荷:50N, 100N, 500N. 1000N
2.精度等级:0. 5级
3.传感器方式:传感器内置
4.分度值。.1N
5.电源:8. 4V电池供电
6.充电器输入电压220V,输入电流300mA 充电器输出电压12V,输出电流300mA
7.待机时间约3个月。
8.电池寿命大于300次。
9.仪表重量。.9Kg
10.峰值保持功能:可抓取测试中的峰值;
11.峰值保持自动解除功能:峰值保持时间((1'1。秒)自比
12.记忆功能:可存储10组测试数据，平均值计算功能;
13.三种单位变换:N, kgf. lbf三种单位自动换算
14. LCD液晶屏可翻转显示:按住单位键3秒后放开，可翻转LCD液晶屏显示方向。
1. The maximum load: 50 n, 100 n, 500 n. 1000 n
2. The level of accuracy: 0. 5
3. The method of sensor: sensor is built
4. Dividing values. 1 n.
5. Power supply: 8. 4 v batteries
6. The charger input voltage 220 v, the input current is 300 ma charger output voltage 12 v, output current
300 ma
7. Standby time is about 3 months.
8. Battery life is more than 300 times.
9. Meter weight. . 9 kg
10. Peak value holding function, can be on the peak of fetching test;
11. Peak keep automatic lifting function: peak hold time ((1 '1. Seconds) since than
The function of memory: can store 10 groups of test data, the average calculation function;
13. Three kinds of unit conversion: N, KGF. LBF three automatic conversion unit
14. Reversible LCD screen display: hold the unit key 3 seconds after the release, the reversible LCD screen
display orientation.
二、保修：Warranty:
发生功能故障（，买家可寄回本公司修理。(注：电瓶，显示屏、 排线、数据线，外壳不在保修范围之内，需加收成本费,维修）；保修期内邮寄费用由卖家承担。
Function failure (, buyers can send back to the company for free repair. (note: the battery, display, platoon line, cable, the shell is not in the scope of the warranty, charged for cost, maintenance free of charge); warranty postage fee shall be borne by the seller.
本页产品地址：http://www.yi7.com/sell/show-4371449.html
免责声明：以上所展示的[ZY6054C 手动卧式测试台]信息由会员[东莞中诺台湾质检仪器设备有限公司]自行提供，内容的真实性、准确性和合法性由发布会员负责。
| 传真：(0571)81021183 | 邮箱：info#yi7.com (请用"@"替换"#")
