|
产品名称: 616WL系列压差变送器
产品型号: 616WL系列
产品介绍
The Series 616WL Differential Pressure Transmitter senses very low pressures of air and non-combustible, compatible gases and sends a standard 4-20 mA output signal. All models, including those featuring the 3 digit LCD digital read-out, are factory calibrated to specific ranges as listed in the chart below.
Positive, negative and differential pressures can be measured within a full span accuracy of ±0.50%. This weatherproof unit is enclosed in a polycarbonate case, designed to meet (IP66/NEMA 4X). Internal digital push button zero and span allow for quick and simple field calibration.
技术参数
介质： Air and non-combustible, compatible gases.
材质：Consult factory.
精度：±0.50% F.S., display accuracy ±0.5%.
稳定性：±1% F.S./yr.
温度范围：0 to 140°F (-17.8 to 60°C).
温度补偿范围： 20 to 120°F (-6.67 to 48.9°C).
压力范围：See Catalog page.
热效应：±0.02% F.S./°F (0.036% F.S./°C).
电源： 12-30 VDC (2-wire).
输出信号： 4 to 20 mA.
调零： Digital, Push Button Adj.
环路阻抗： DC; 0-900 ohms maximum.
电流：DC; 38 mA maximum.
电气连接：Screw-type terminal block.
过程连接： Barbed, dual size to fit 1/8" and 3/16" (3.12 and 4.76 mm) I.D. rubber or vinyl tubing.
封装：NEMA 4X (IP66).
安装方向： Vertical, consult factory for other position orientations.
重量： Without LCD 17 oz (482 g); with LCD 18 oz (510 g).
认证：CE.
选型表
|
EXAMPLE
|
616WL
|
1
|
AT
|
Series 616WL-1-AT Differential Pressure Transmitter, range 0-0.10" w.c., with aluminum tag.
|
|
SERIES
|
616WL
|
|
|
Differential Pressure Transmitter
|
|
RANGE
|
|
1
2
3
4
5
11
12
13
14
15
21
22
23
24
25
31
32
33
34
35
|
|
0-0.10" w.c.
0-0.25" w.c.
0-0.50" w.c.
0-1.00" w.c.
0-2.50" w.c.
0.10-0-0.10" w.c.
0.25-0-0.25" w.c.
0.50-0-0.50" w.c.
1.00-0-1.00" w.c.
2.50-0-2.50" w.c.
0-30 Pa
0-60 Pa
0-100 Pa
0-125 Pa
0-250 Pa
30-0-30 Pa
60-0-60 Pa
100-0-100 Pa
125-0-125 Pa
250-0-250 Pa
|
|
OPTIONS
|
|
|
AT
LCD
NIST
PRESETD
|
Aluminum Tag
Liquid Crystal Display
NIST Certificate of Calibration
LCD Display Set to 0-
|
|
免责声明：以上所展示的[ 616WL 压差变送器]信息由会员[北京艾凡鹏仪表有限公司]自行提供，内容的真实性、准确性和合法性由发布会员负责。
| 传真：(0571)81021183 | 邮箱：info#yi7.com (请用"@"替换"#")
