提交询价信息 |
发布紧急求购 |
价格:电议
所在地:广东 深圳市
型号:TGR6000
手机:13530851851
电话:0755-33217630 33217631
更新时间:2023-11-23
浏览次数:1871
公司地址:广东深圳市龙岗区南湾街道下李朗社区平吉大道9号华熠大厦A区1211
深圳市深东金仪器有限公司早在1996年香港成立香港东金电子有限公司,在2006年10月28在深圳成立深圳市福田区华强广场东金电子仪器经营部。我们以销售电子测量仪器仪表为主要业务,为客户提供zui新型、高品质的测试仪器。并以合理的价格、完善的售前及售后服务,使客户得到平等、互惠的对待。我司的销售人员拥有多年从事仪器行业销售的工作经验,能为您们提供专业的意见和分析,我们拥有丰富维修经验丰富的工程师为您们提供技术支持与技术培训;可以快捷地帮客户解决测试方面的问题。同时我公司也系统集成方案的供应商,曾为多家大型上市公司设计中央系统集成方案也很好地解决了客户长期解决不了的生产测试难题,也节省了生产的成本;也在行业中树立了良好的口碑。
深圳市深东金仪器有限公司主营:数字/模拟电视中央信号源、数字信号源/发生器/码流卡、电视信号发生器、示波器、音视频分析仪、安规测试仪、EMC测试仪、LCR测试仪、GPS信号发生器,HDMI高清信号源,彩色分析仪,DMB-TH/DVB-T/ATSC/ISDB调制器与功率放大器、示波器电源等仪器;主营的品牌有:西班牙Promax、美国力科(LeCory)、德国伟视(WISI)、日本横河(Yokogawa)、台湾固纬(GWinstek)、日本菊水(KIKUSUI)、美国是德(安捷伦)、日本营电(EIDEN)、日本LEVEAR,英国比克PicoScope等;同时我公司还有自主品牌宝码(Pro-instrument)是我司稳步发展的动力.
我们秉承“顾客至上,锐意进取”的经营理念,坚持“客户一”的原则为广大客户提供优质的服务和geng好的测试方案,客户的满意就是我们前进的zui大动力。所以在互联网发展迅猛的今天,我司在立足深圳,放眼世界,将我们的品牌服务做强做大,为客户geng好地服务。您的满意就是我们前进的zui大动力。
The TGR6000 is a low-cost 6GHz signal generator intended for CW (carrier wave) applications wher
0MHz to 6000MHz frequency range
10Hz setability, +/-1ppm frequency stability
Locking to external frequency standard
-110dBm to +7dBm amplitude, 0.1dB steps
Fast stepping sweep with dwell times down to 10ms
List sweep of up to 1000 points of amplitude vs frequency
User compensation tables for specific test set-ups
Storage for 12 generator set-ups and 16 sweep lists
Compact half-rack 2U casing uses minimum bench space
Full remote co
Significantly lower cost than other 6GHz generators
Technical specification | |
Frequency | |
Frequency Range | 10MHz to 6000MHz |
Setting Resolution |
10Hz by direct keyboard entry, or in user-set increments of 10Hz to 999•999MHz by rotary co |
Phase Noise | 500MHz Carrier: <-110dBc/Hz @ 20kHz offset; <-120dBc/Hz @ 100kHz |
3GHz Carrier: <-95dBc/Hz @ 20kHz offset; <-110dBc/Hz @ 100kHz offset | |
6GHz Carrier: <-89dBc/Hz @ 20kHz offset; <-104dBc/Hz @ 100kHz offset | |
Residual FM | Equivalent peak deviation for 300Hz to 3.4kHz B/W: 12Hz at 500MHz carrier |
Settling Time | <8ms to settle within 100Hz or 0.1ppm of final frequency, if greater |
Reference Frequency | Internal or External (via rear panel BNC) |
Internal Accuracy | +/- 1 ppm over 15°C to 30°C; +/- 2 ppm over 5°C to 40°C |
Internal Stability | < +/-1ppm/year ageing |
Internal Ref. Out | 10MHz from 50 Ohms, amplitude 2V pk-pk into 50 Ohms |
External Ref In | 10MHz into 50 Ohms, amplitude 2V pk-pk to 5V pk-pk |
Output Level | |
Level Range | –110dBm to +7dBm (0.1μV to 500mV into 50 Ohms) |
Setting Resolution | 0.1dB (or 0.01μV to 1mV) by direct keyboard entry, or in user-set increments of 0.1dB to 100dB (or 0.01μV to 100mV) |
Accuracy | Better than ± 2dBm |
Harmo |
<-25dBc at +7dBm. <-30dBc@levels <=0dBm 30 to 6000MHz, <-25dBc@levels <=0dBm 10 to 30MHz |
Sub-Harmo |
<3000MHz : None. >3000MHz :<–40dBc (typ) @ +7dBm |
Non-Harmo |
<–50dBc >10kHz offset 10 to 3000MHz, <-44dBc >10kHz offset 3000MHz to 6000MHz |
Output Co |
Type N |
Sweep | Frequency and amplitude sweep |
Step Sweep | Step frequency and/or amplitude according to a formula over a specified number of points |
Dwell Time | Individually programmable 0.01 to 10.000sec per step |
Max Points | 1000 |
Sweep Run |
Co |
Step Spacing | Linear or logarithmic |
Sweep Triggering | Manual, Ext. signal, timed (0.1 – 999.9sec) or via remote interface |
Sync Signal | Output Stable) available during dwell time. Programmable as high or low |
List Sweep | As for Step Sweep except that a user defined table of frequency, amplitude and dwell time values defines the steps. The table can be created within the instrument or downloaded via the remote interfaces |
Max Points | 1000 |
List Storage | Up to 16 Sweep Lists can be stored permanently within the instrument |
Point Trigger | Each point in a sweep (step or list) can be subject to a trigger event rather than a dwell time. Trigger by Manual, Ext. signal or via remote interface |
Trim | (User Level Compensation Tables) |
Function | A table of frequency/gain pairs allows the user to modify the generator output level with respect to frequency to calibrate an entire test set up or improve the calibration of the generator alone |
Max Points | 100 |
Interfaces |
Full digital remote co |
RS-232 | 9-pin D connector. Variable Baud rate 1200 and 115200 Baud |
USB | USB 2.0 connection. Operates as a virtual COM port |
GPIB (IEEE-488) |
Co |
LAN (Ethernet) |
Standard 10/100 ba |
General | |
Size and Weight | 2U (86.5mm) height; half-rack (213mm) width; 350mm long. 3.65 kg. (8 lb) |
Power | 110-240VAC ±10% 50/60Hz; 100-120VAC ±10% 400Hz; 60VA max |
Approvals | Complies with EN 61010-1 (Safety) and EN61326 (EMC) |
Operating manual, driver software, power lead
zui大频率 | 6000MHz | |
zui小频率 | 10 兆赫 | |
分辨率 | 0.1 dB | |
扫描 | 线性,对数 | |
接口类型 | GPIB,LAN,RS232,USB | |
尺寸 | 350 x 213.5 x 86.5mm | |
zui高工作温度 | +40°C | |
型号(P) | TGR 6000 | |
高度 | 86.5mm | |
插头类型 | Type C - European Plug, Type G - British 3-pin | |
重量 | 3.65kg | |
zui低工作温度 | +5°C | |
长度 | 350mm | |
数据输入 | 键盘 | |
输入 | 交流输入,参考输入,触发输入 | |
宽度 | 213.5mm | |
显示器类型 | 20个字符´4行 |