产品目录
产品详情
产品简介
防爆安温度计(Standard Weight Probe)34米 型号: IC01-TP-7D库号:M295474...
产品详细介绍
防爆安温度计
防爆安温度计
防爆安温度计(Standard Weight Probe)34米 型号: IC01-TP-7D
防爆安温度计
防爆安温度计(Standard Weight Probe)34米 型号: IC01-TP-7D
库号:M295474
TP7-D
大尺寸:34.3 x 18.4 x 11.4 cm
2节AA碱性电池,寿命大约200小时
电池操作温度范围4到130°F,20至54°C
注:如果环境温度很低或高电池不可能提供充足的电力。
表壳材质:聚丙烯共混材料,不锈钢和铝
内置铂电阻的不锈钢传感器外有防静电电缆套管,芳纶纤维加强了抗切割和耐碎性。
电缆采用碳氟化合物,如FEP、PFA或相似材料作为缘材料
温度:温度范围:-40 to +204°C
分辨率:0.1℃,
误差:±0.1°C from 0 to 100°C
±0.3°C from 100 to 200°C
度漂移不过 0.05%/年
符合API要求
安等级:II 2 (1) G Ex ib[ia] IIB T4
The TP7-D employs the proven RTD design that has been used in the TP 7 and TP 8 for many years. A sealed industrial quality overlay provides a user interface that is easy to use with gloves. A polypropylene blend enclosure protects the circuit board and large LCD from penetration by impact, water and reactive liquids.
The new TP 7-D circuit board is an evolutio nary step up
from our highly accurate, reliable and successful TL1 laboratory thermometer.
The Power Button’s primary function powers the instrument for intervals of a bout
20 minutes since the last button was accessed. The Power Button can also be used
to co nserve power and clear the memory, or to make adjustment while in
calibration mode. A simple menu operation is displayed by holding the Function
Button, and alternately functions to allow adjustments in the calibration mode.
Arrows on the left side of the display show the direction of the temperature
reading and whether stability has been reached. At the user’s discretion
stabilized temperatures can be logged at numerous liquid levels for a running
average and later displayed for the user’s docu menting purposes. But this
feature never interferes with simply getting an accurate temperature
reading.
To endure the enviro nment and be intrinsically safe, the TP 7-D
is manufactured of materials, which are both immune to petrochemicals and are
non-sparking. The enclosure is made of a polypropylene blend. The probe assembly
is co nstructed using non-stick cable and stainless steel sensor
components.
Operatio nal Attributes:
Easily replac eable AA
Batteries, provides an estimated *200 hours operation.
Circuit logic automatically indicates low battery condition, automatically shuts off after twenty minutes, shows temperature trend and stabilization, displays error codes for failure determination.
The low power backlight for night operation is photo sensor co ntrolled for co nvenience and battery conservation.
In nighttime co nditions the backlight illuminates the display.
Celsius or Fahrenheit units with C/F indication can be easily selected from the Function Button.
User Manual explains intuitive calibration procedure that can be done through the external faceplate buttons.
Specifications
Maximum Dimensions:
13.5 x 7.25 x 4.5 in.
34.3 x 18.4 x 11.4 cm
Probe:
304 Stainless Steel, Sealant, Aramid Fiber Reinforced, FEP or PFA
Cable Jacket, Coaxial Construction
Enclosure Material:
Polypropylene Blend, Stainless Steel and Aluminum.
Batteries:
2 AA Alkaline; Battery Life of approximately
200 hours
Battery manufacturer’s battery operating temperatature range -4 to 130°F, -20 to 54°C
Note: Battery may not provide adequate power if ambient temperature is extremely low or high.
Temperature:
Resolution 0.01
Range: -40 to +400°F
-40 to +204°C
Calibrated Accuracy:
±0.2°F from 32 to 200°F
±0.5°F from 200 to 400°F
±0.1°C from 0 to 100°C
±0.3°C from 100 to 200°C
4 Point NIST Traceable Report of Test
Long-term drift not to exceed 0.05%/year
Meets API requirements
大尺寸:34.3 x 18.4 x 11.4 cm
2节AA碱性电池,寿命大约200小时
电池操作温度范围4到130°F,20至54°C
注:如果环境温度很低或高电池不可能提供充足的电力。
表壳材质:聚丙烯共混材料,不锈钢和铝
内置铂电阻的不锈钢传感器外有防静电电缆套管,芳纶纤维加强了抗切割和耐碎性。
电缆采用碳氟化合物,如FEP、PFA或相似材料作为缘材料
温度:温度范围:-40 to +204°C
分辨率:0.1℃,
误差:±0.1°C from 0 to 100°C
±0.3°C from 100 to 200°C
度漂移不过 0.05%/年
符合API要求
安等级:II 2 (1) G Ex ib[ia] IIB T4
The TP7-D employs the proven RTD design that has been used in the TP 7 and TP 8 for many years. A sealed industrial quality overlay provides a user interface that is easy to use with gloves. A polypropylene blend enclosure protects the circuit board and large LCD from penetration by impact, water and reactive liquids.
The new TP 7-D circuit board is an evolutio
To endure the enviro
Operatio
Easily replac
Circuit logic automatically indicates low battery condition, automatically shuts off after twenty minutes, shows temperature trend and stabilization, displays error codes for failure determination.
The low power backlight for night operation is photo sensor co
In nighttime co
Celsius or Fahrenheit units with C/F indication can be easily selected from the Function Button.
User Manual explains intuitive calibration procedure that can be done through the external faceplate buttons.
Specifications
Maximum Dimensions:
13.5 x 7.25 x 4.5 in.
34.3 x 18.4 x 11.4 cm
Probe:
304 Stainless Steel, Sealant, Aramid Fiber Reinforced, FEP or PFA
Cable Jacket, Coaxial Construction
Enclosure Material:
Polypropylene Blend, Stainless Steel and Aluminum.
Batteries:
2 AA Alkaline; Battery Life of approximately
200 hours
Battery manufacturer’s battery operating temperatature range -4 to 130°F, -20 to 54°C
Note: Battery may not provide adequate power if ambient temperature is extremely low or high.
Temperature:
Resolution 0.01
Range: -40 to +400°F
-40 to +204°C
Calibrated Accuracy:
±0.2°F from 32 to 200°F
±0.5°F from 200 to 400°F
±0.1°C from 0 to 100°C
±0.3°C from 100 to 200°C
4 Point NIST Traceable Report of Test
Long-term drift not to exceed 0.05%/year
Meets API requirements
如果您觉得“型号: IC01-TP-7D 防爆安温度计”描述资料不够齐全,请联系我们获取详细资料。(联系时请告诉我从仪器交易网看到的,我们将给您最大优惠!)
本页链接:http://www.yi7.com/com_midwestziyu1/sell/itemid-6622927.html
已经有1076位访客查看了本页.
产品咨询
相关产品推荐
相关技术文章
- icon 薄膜过滤器的使用安操作
- icon 日本三协 磨机负荷控制系统(电耳) (包含音频信
- icon 辣椒素检测仪 型号:D408247 产品介绍 带试剂盒