产品目录
- 中央信号系统方案
- 韩国 Master
- 高清信号源
- 模拟/数字电视产品
- 日本柯尼卡美能达 Konica minolta
- 颜色及外观测量
- 光/显示器测量
- 日本菊水 Kikusui
- 安规测试仪
- 交/直流电源
- 电子负载
- 信号发生器/抖晃仪
- 北京普源 Rigol
- 信号发生器
- 频谱分析仪
- 数字示波器
- 数字万用表
- 直流电源
- 电子负载
- 数据采集/开关系统
- 电子负载
- 示波器探头/附件
- 德国德图 Testo
- 红外热像仪
- 温湿度产品
- 电子记录仪
- 环境/室内测量仪
- 台湾华仪 Extech
- 安规综合测试仪
- 耐压绝缘测试仪
- 接地电阻测试仪
- 泄漏电流测试仪
- 交流电源
- 美国 Flir
- 红外热像仪
- 万用表
- 环境类测试仪表
- 工业内窥镜
- 日本日置 Hioki
- 电子测量仪表
- 记录仪/数据采集仪
- 电池测试仪
- 安规/安全标准测试仪
- 电流传感器
- 电力测量仪器
- 环境类测量仪表
- 日本德士 Texio
- 可编程直流稳压电源
- 电子负载
- 示波器
- 通用测量仪器
- 信号发生器
- 台湾致茂 Chroma
- 可编程交/直流电源
- 交/直流电子负载
- 视频图像产生器
- 电气安规测试仪
- LCR表/自动变压器测试系统
- 数位式功率计
- 色彩分析仪
- 英国 Aim-tti
- 信号发生器
- 电子负载
- 直流稳压电源
- 频谱分析仪
- LCR数字电桥
- 频率计
- 数字万用表
- 数字源表
- 美国泰克 Tektronix
- 示波器探头/附件
- 数字示波器
- 信号发生器
- 频谱分析仪
- 直流电源
- 频率计数器/定时器
- 香港 Pro-instrument
- 美国福禄克 Fluke
- 安规测试仪
- 红外热像仪
- 示波表
- 数据采集仪
- 其他测试仪表
- 校准仪
- 美国是德 Keysight
- 信号发生器
- 直流电源
- 示波器
- LCR/阻抗测试
- 频谱分析仪
- 热像仪
- 频率计数器
- 万用表
- 直流电子负载
- 功率分析仪
- 数据采集器
- 美国 DESCO
- 静电测试仪
- 日本 图技GRAPHTEC
- 记录仪
- 天马TENMA
- LabSat GNSS GPS导航模拟器
- 南京长盛
- 青智
- 德国 EA ELEKTRO-AUTOMATIK
- 实验室直流电源
- 罗德与施瓦茨R&S
- 美国B&K PRECISION
- 美国艾示科 EXTECH
- 钳表 红外测温仪
- 环境和机械测试
- 优利德 UNI-T
- 数字示波器
- 钳表
- 频谱分析仪
- 热像仪
- 台湾 博计Prodigit
- 电子负载
- 分流器/功率表
- 美国 力科LeCory
- 示波器
- 吉时利 Keithley
- 直流电源
- 数字源表
- 数字万用表
- 台湾 阳光
- 台湾 固纬GWinstek
- 频谱分析仪
- 数字示波器
- 信号源
- 电源
- 基础测量仪器
- 交流电源
- 英国Pico Technology
- USB示波器
- 数据记录仪
- 日本 横河Yokogawa
- 数字功率仪
- 数据采集设备
- 信号发生器/信号源
- Everfine/远方
联系我们
公司名称:深圳市深东金仪器有限公司
联系人:梁经理
电话:0755-33217630 33217631
手机:13530851851
传真:0755-33217631
邮件:1173597030@qq.com
地址:广东深圳市龙岗区南湾街道下李朗社区平吉大道9号华熠大厦A区1211
产品详情
产品简介
Aim-tti 三路输出稳压电源Aim-tti MX100T直流稳压电源,MX100T价格:Bench/System DC Power Supply, Multi-Range, Digital Control Triple Outputs, 3 x 35V/3A 315W, No Interfaces...
产品详细介绍
Aim-tti MX100T直流稳压电源,MX100T
Aim-tti 三路输出稳压电源
Aim-tti 三路输出稳压电源
Aim-tti 三路输出稳压电源
Bench/System DC Power Supply, Multi-Range, Digital Co
-
Three high performance outputs each with full functio
nality - Range switching gives variable voltage/current combinations
- Shared power mode provides double power from a single output
- Low output noise and ripple via linear final regulation
- High setting resolution of up to 1mV and 0.1mA
- Variable OVP and OCP trips on all outputs
-
50 setting memories per output plus 50 l
inked memories -
Selec
table voltage tracking (isolated tracking) - Selectable current meter averaging
- Switchable remote sense capability
- Graphic LCD provides simultaneous output metering
-
Numeric or spin-wheel co
ntrol of all parameters -
Individual or combined output on/off co
ntrol with - programmable delay sequencing.
- 3U half-rack case for bench or rack mounting
- GPIB, RS-232, USB and LAN (LXI) interfaces (-P models)
- Duplicate power & sense terminals at rear (-P models)
MX100T and MX100TP:
- 315 watts total power
- Three outputs of equal power, each capable of 35V at 3A
- Range switching provides up to 70 volts and up to 6 amps
The MX100T differs from most other triple output power supplies in havin
Each output features simultaneous high resolution metering, switchable remote sense, and an individual output switch.
Mixed-mode regulation To provide its impressive power density the MX series combines high frequency switch-mode pre-regulation with linear post-regulation to offer performance that comes close to that of an all-linear design.
Excellent line and load regulation is matched by low noise and good transient response.
Range switching and power co
Outputs one and two can provide 16V/6A as an alternative to 35V/3A, while output three can provide 70V/1..
When higher power is required, outputs two and three can be combined internally to provide up to 210 watts as either 35V/6A or 70V/3A from a single output. Remote co
Aim-tti MX100T直流稳压电源,MX100T价格:
OUTPUT 1 | |
---|---|
Ranges |
Range 1 - 0V to 35V at 1mA to 3A; Range 2 - 0V to 16V at 1mA to 6A |
Operating Mode |
Co |
Voltage Setting | By direct numeric entry or quasi-analogue rotary wheel; resolution 1mV. |
Current Setting | By direct numeric entry or quasi-analogue rotary wheel; resolution 1mA. |
Setting Accuracy |
Voltage - 0.05% of reading ± 3mV; Current - 0.3% of reading ± 3mA to 3A, 0.5% of reading ± 3mA to 6A |
Setting Stores | Up to 50 set-ups can be saved and recalled via the keyboard (or the digital interfaces on MX100TP). |
Load regulation | <0.01% +5mV (CV mode) for any load change using remote sense. |
Line regulation | <0.01% +5mV (CV mode) for a 10% line voltage change. |
Ripple & Noise | Typically <0.5mV rms, <5mV pk-pk, 1mV rms max. (20MHz bandwidth). |
Transient Respo |
<100us to within 50mV of set level for 5% to 95% load change. |
Over Voltage Trip | Settable 1V to 40V in 0.1V steps |
Over Current Trip | Settable 0.1A to 7A in 0.01A steps |
Sensing |
Selec |
OUTPUT 2 | |
---|---|
Ranges |
Range 1 - 0V to 35V at 1mA to 3A; Range 2 - 0V to 16V at 1mA to 6A Range 3 - 0V to 35V at 1mA to 6A* (available when output 3 is disabled) |
Operating Mode |
Co |
Voltage Setting | By direct numeric entry or quasi-analogue rotary wheel; resolution 10mV. |
Current Setting | By direct numeric entry or quasi-analogue rotary wheel; resolution 10mA. |
Setting Accuracy |
Voltage - 0.1% of reading ± 10mV; Current - 0.3% of reading ± 3mA to 3A, 0.5% of reading ± 3mA to 6A |
Setting Stores | Up to 50 set-ups can be saved and recalled via the keyboard (or the digital interfaces on MX100TP). |
Load regulation | <0.01% +5mV (CV mode) for any load change using remote sense. |
Line regulation | <0.01% +5mV (CV mode) for a 10% line voltage change. |
Ripple & Noise | Typically <0.5mV rms, <5mV pk-pk, 1mV rms max. (20MHz bandwidth). |
Transient Respo |
<100us to within 50mV of set level for 5% to 95% load change. |
Over Voltage Trip | Settable 1V to 40V in 0.1V steps |
Over Current Trip | Settable 0.1A to 7A in 0.01A steps |
Sensing | Selectable local or remote sensing. |
OUTPUT 3 | |
---|---|
Ranges |
Range 1 - 0V to 35V at 1mA to 3A; Range 2 - 0V to 70V at 1mA to 1. Range 3 - 0V to 70V at 1mA to 3A* (available when output 2 is disabled). |
Operating Mode |
Co |
Voltage Setting | By direct numeric entry or quasi-analogue rotary wheel; resolution 10mV. |
Current Setting | By direct numeric entry or quasi-analogue rotary wheel; resolution 1mA. |
Setting Accuracy |
Voltage - 0.1% of reading ± 10mV; Current - 0.3% of reading ± 3mA |
Setting Stores | Up to 50 set-ups can be saved and recalled via the keyboard (or the digital interfaces on MX100TP). |
Load regulation | <0.01% +5mV (CV mode) for any load change using remote sense. |
Line regulation | <0.01% +5mV (CV mode) for a 10% line voltage change. |
Ripple & Noise |
Typically <0.5mV rms, <5mV pk-pk, 1mV rms max. (20MHz bandwidth). 70V range - typically <1mV rms, <10mV pk-pk, 1.5mV rms max. |
Transient Respo |
<100us to within 50mV of set level for 5% to 95% load change. |
Over Voltage Trip | Settable 1V to 80V in 0.1V steps |
Over Current Trip | Settable 0.1A to 3. in 0.01A steps |
Sensing | Selectable local or remote sensing. |
Output Protection | |
---|---|
External Voltage | Output will withstand forward voltages of up to 50V (O/Ps 1 and 2) or 80V (O/P 3). Reverse protection by diode clamp, 3A max. |
Fault Trip |
The output will be shut down if a trip co |
Over Temperature |
Mo |
Sense Error |
Mo |
Co |
|
---|---|
Output Terminals |
Universal 4mm safety binding posts on 19mm (0·75”) spacing at front. Screw terminals at rear (MX100TP only). Terminals can accept fixed shroud 4mm plugs, standard 4mm plugs, fork terminals and bare wires. |
Sense Terminals | Sprung loaded screw-less terminals at front. Screw terminals at rear (MX100TP only). |
OUTPUT ON/OFF SWITCHING | |
---|---|
Individual On/Off | Individual keys for each output. On state indicated by key illumination. |
Multi-On/Multi-Off | Separate keys enable any combination of outputs to be turned on or off either simultaneously (default) or with timed delays from 10ms and 20s. Delayed operation indicated by flashing key illumination. |
VOLTAGE TRACKING | |
---|---|
The power supply can be set so that the voltage of an output is automatically set equal to that of another output and tracks any changes. | |
Tracking Modes | None, V2 tracks V1, V3 track V2, V2 and V3 both track V1. |
SETTING MEMORIES | |
---|---|
Individual Output Memories: | |
No. of Stores | 50 per output |
Parameters Stored | Range, Set Volts, Set Current, OVP, OCP |
l |
|
No. of Stores | 50 |
Parameters Stored | Range, Set Volts, Set Current, OVP, OCP (for all three outputs) |
METERING (each Output) | |
---|---|
Meter Function | 5 digit voltage and current meters (O/P 1), 4 digit voltage and current meters (O/Ps 2 & 3). Simultaneous display of actual and set values. |
Meter Resolution | 1mV/0.1mA (O/P 1), 10mV/1mA (O/Ps 2 & 3). |
Meter Accuracy | As per setting accuracy (CV mode). |
Additio |
V x A Calculated power in watts. Resolution 0.01Ohms. Accuracy 0·5% ± 3 digits |
DIGITAL BUS INTERFACES (MX100TP only) | |
---|---|
The MX100TP offers full remote co |
|
RS-232 | Standard 9-pin D connector. |
USB |
USB 2.0 co |
GPIB (IEEE-488) |
The interface co |
Ethernet (LAN) |
Standard 10/100 ba |
LXI Compliance | LAN interface is compliant with LXI core 2011. (LXI is the abbreviation for LAN eXtensions for Instrumentation). |
DIGITAL PROGRAMMING PERFORMANCE (MX100TP only) | ||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Programming Speed: | ||||||||||||||||||||||||||||||||||||
Command Delay | Typically <100ms between receiving the command terminator for a step voltage change at the instrument and the output beginning to change. | |||||||||||||||||||||||||||||||||||
Output Response: | ||||||||||||||||||||||||||||||||||||
|
DRIVER SOFTWARE SUPPLIED (MX100TP only) | |
---|---|
IVI Driver | An IVI driver for Windows is supplied. This provides support for common applications such as LabView*, LabWindows*, HPVEE* etc. |
USB Driver | An installation file is supplied which calls a standard Windows* USB driver. |
* LabView and LabWindows are trademarks of Natio * HPVEE (now Agilent VEE) is a trademark of Agilent Technologies. * USB interface is supported for Windows 2000, XP, Vista, 7 and 8 (including 64 bit versions). Windows is a trademark of Microsoft. |
GENERAL SPECIFICATIONS | |
---|---|
Input: | |
AC Input | 110V to 240V AC ±10%, 50/60Hz. Installation Category II. |
Input Power | 500VA max. |
Temperature & Environmental: | |
Operating Range | +5ºC to +40ºC, 20% to 80% RH |
Storage Range | -40ºC to + 70ºC |
Enviro |
Indoor use at altitudes up to 2000m, Pollution Degree 2. |
Cooling | Intelligent variable-speed fans. |
Safety & EMC: | |
Safety | Complies with EN61010-1 |
EMC | Complies with EN61326 |
Physical: | |
Size | 212 x 130 x 375mm (WxHxD) (half rack x 3U height) |
Weight | 4.8kg (MX100T); 4.9kg (MX100TP). |
OPTIONS: | |
Rack Mount | 19 inch rack mount for one or two power supplies. |
如果您觉得“MX100T Aim-tti 三路输出稳压电源”描述资料不够齐全,请联系我们获取详细资料。(联系时请告诉我从仪器交易网看到的,我们将给您最大优惠!)
本页链接:http://www.yi7.com/com_sdongjin/sell/itemid-7178708.html
已经有1779位访客查看了本页.
产品咨询
相关产品推荐
相关技术文章
- icon 英国tti直流电源基础知识介绍
- icon 使用频率计测量频率时需要考虑的三个因素
- icon 可编程直流电源是怎么工作的?这几点很重要!
- icon Aim-tti MX180TP 新产品 三通道可编程电源
- icon Aim-tti MX100QP新产品 四通道可编程直流电源