AW30-02BDE-B 供应SMC过滤减压阀主要分类
供应SMC过滤减压阀主要分类可选项c E 方形埋入式压力表(带限位指示器),无设定螺母(面板安装用)准标准a - 0.05~0.85MPa设定,聚碳酸酯杯过滤器和减压阀一体化,可省空间、省配管●该减压阀内置能将出口侧压力快速排出的机构...
供应SMC过滤减压阀主要分类
注)安装接头电缆时,因为有方向性,使用本公司接头电缆(V100
-49-1□)时,接头部的箭头记号应与阀侧的三角记号对上进
行安装。方向性没有对上就拧入,会造成插针破损等故障。
Note 1) Can be used with positive pressure to suit the application.
Note 2) Please use with pilot X port pressure equal to or higher than the release port 1(P) pressure.
Note 3) Impact resistance: No malfunction occurred when it is tested in the axial direction and at the right angles
to the main valve and armature in both energized and de-energized states every
o
Vibration resistance: No malfunction occurred in a one-sweep test between 45 and 2000 Hz. Test was
performed at both energized and de-energized states in the axial direction and at the
right angles to the main valve and armature. (Values at the initial period)
供应SMC过滤减压阀主要分类
range because they have voltage drop due to internal circuit.
Z type 24 VDC: –7% to +10%
12 VDC: –4% to +10%
T type 24 VDC: –5% to +10%
12 VDC: –6% to +10%F2
3/5(E) vacuum pressure port]
Applicable tubing O.D: ø8
M5 x 0.8
[2(B) vacuum pad port]
One-touch fitting
[1(P) release pressure port]
Applicable tubing O.D: ø8, ø5/16"
One-touch fitting
[PE: Pilot EXH port]
Applicable tubing O.D: ø4, ø5/32"
One-touch fitting
(X: External pilot port)
Applicable tubing O.D: ø4, ø5/32"
(With needle fully
opened 62.8)
L3 (L4)
M5 x 0.8 (with plug)
[PS pressure detection port]
Co
upward
Switch for locking
a connector
With slotted locking
needle type
U side D side
F1 release pressure side
Filter body assembly
With plug
46.5 (with plug)
F2 vacuum pressure side
Filter body assembly
供应SMC过滤减压阀主要分类
如果您觉得“AW30-02BDE-B 供应SMC过滤减压阀主要分类”描述资料不够齐全,请联系我们获取详细资料。(联系时请告诉我从仪器交易网看到的,我们将给您最大优惠!)
本页链接:http://www.yi7.com/com_shqt8808/sell/itemid-3451181.html
已经有2317位访客查看了本页.