TOYOOKI电磁换向阀,日本TOYOOKI电磁换向阀
TOYOOKI电磁换向阀,日本TOYOOKI电磁换向阀外部泄油管道请在外部泄油式外滚柱硬度为HRC48 52行慢速进→快速返回”的进给动作控制时请分别Please feed operation when control respectively...
TOYOOKI电磁换向阀,日本TOYOOKI电磁换向阀
对内部泄油式的OUT外部泄油式的DR侧施加0.35MPa 左右的背压
使用时请将柱帽凸轮的头端角度设置在30以下
将容许背压设置在4MPa以下需要用Rc螺丝连接
0.2 ~ 2 0.1 ~ 1 HFDF1-KG2K-3M-K1-03
0.2 ~ 8 0.1 ~ 1 HFDF1-KG8K-3M-K1-03
的型号末尾注明-90外螺纹管道或-90内螺纹管
Outer roller hardness of HRC48 52
rows into the slow → fast retur
外部泄油管道请在外部泄油式外滚柱
硬度为HRC48 52行慢速进→快速返回”的进给动作控制时请分别
Please feed operation when control respectively
Models indicate the end -90 -
90 externally threaded pipe or tube inner thread
下推力因背压而变如右表所示在内部泄油式中
构成高背压出OUT压力回路会缩短滚柱或顶针的寿命因此使用时请
Lower thrust due to back pressure
variations shown in the table in the internal drain formula
(OUT pressure circuit will shorten the l
ife of the roller or thimble therefore constitute a high back pressure when using a
如果您觉得“TOYOOKI电磁换向阀,日本TOYOOKI电磁换向阀”描述资料不够齐全,请联系我们获取详细资料。(联系时请告诉我从仪器交易网看到的,我们将给您最大优惠!)
本页链接:http://www.yi7.com/com_shqt8808/sell/itemid-6255345.html
已经有1035位访客查看了本页.