PNEUMAX过滤调压阀材质资料,意大利纽迈司过滤调压阀
PNEUMAX过滤调压阀材质资料,意大利纽迈司过滤调压阀Before connecting, remove any residual ontaminants from the tubing to The minimum change in signal if the s信号的小变化量如果调压阀的灵敏度小于...
PNEUMAX过滤调压阀材质资料,意大利纽迈司过滤调压阀
这个百分比指的是在整个工作跨度中能够引起下游压力值变化的参考
ange of 10bar downstream pressure will be because each reference
Achange in signal greater than 0.05V can be passed
M4mounting holes on the body are mounted
使用编号为170M5的安装支具体安装方式如下图所示
Before connecting, remove any residual ontaminants from the tubing to
The minimum change in signal if the s
信号的小变化量如果调压阀的灵敏度小于
This percentage refers to a reference
The compressed air is connected to the
valve body via the G1 ze 1) and the G1 / 2 threaded port (size 3).
等于±0.5%,工作压力范围为10bar则下游压力会因为每一次参考
that can cause a change in downstreampressure throughout the span of work
信号大于0.05V的改变而改变可以通过阀体上的M4安装孔直接安装在墙体上
ensitivity of the regulator is less thanEqual to ± 0.5%, the working pressure r
directly on the wall. Use the mountingbracket numbered 170M5. The mounting details are
PNEUMAX过滤调压阀材质资料,意大利纽迈司过滤调压阀
如果您觉得“PNEUMAX过滤调压阀材质资料,意大利纽迈司过滤调压阀”描述资料不够齐全,请联系我们获取详细资料。(联系时请告诉我从仪器交易网看到的,我们将给您最大优惠!)
本页链接:http://www.yi7.com/com_shqt8808/sell/itemid-6539209.html
已经有1230位访客查看了本页.