喜开理直动式电磁阀,4F710E-25-TP-AC380V
喜开理直动式电磁阀,4F710E-25-TP-AC380V30stroke or less) Total lengthof荷电流的大值20mA是在25℃下测得的30行程以下)止动装置的全长ℓ=50mm主体时请在允许吸收的能量值...
喜开理直动式电磁阀,4F710E-25-TP-AC380V
请在负荷总重量相对于理论推力的负荷率在下表以下范围内选定缸径作为止动装置使用时
请选择50行程以下(MSTG-M)的机种(φ12~φ16
螺栓的锁入深度为2d以请采取防止松动(粘着剂弹簧垫圈等)措施
ℓ = 50 mm or less When fixing the cyli
nder body, be sure to allow the absorbed energy
开关工作环境温度高于25℃时,负荷电流大值将低于20mA
Please select the model (MSTG-M) of 50 stroke or less (φ12 to
范围内使如超出允许吸收的能量值范围请
在外部额定电压VDC 24AC 220(50/60Hz)
额定电压变化范围 ±10%消耗功率W视在功率 VA
The maximum load current of 20 mA is measured at 25 ° C
30 stroke or less) Total lengthof topper
负荷电流的大值20mA是在25℃下测得的
30行程以下)止动装置的全长ℓ=50mm主体时请在允许吸收的能量值
DC 2.9 2.C 3.7/3.1 6.0/4.9耐热等 级
另外设置缓冲装允许吸收的能量值请参考规格栏或机型选定指南
When the selected bore diameter is used as a stopper when the total
load weight is lower than the theoretical thrust load rate in the range below the table below
如果您觉得“喜开理直动式电磁阀,4F710E-25-TP-AC380V”描述资料不够齐全,请联系我们获取详细资料。(联系时请告诉我从仪器交易网看到的,我们将给您最大优惠!)
本页链接:http://www.yi7.com/com_shqt8808/sell/itemid-6639147.html
已经有904位访客查看了本页.