进口分析天平厂家

无论是简单的日常工作，还是复杂的称量程序，NewClassic MS半微量天平将的性能和提高生产力进行了的结合，这一切都来源于快速的稳定时间以及一贯的可靠结果。来自瑞士的高分辨率称量技术(HRT)，保证了整个称量范围内的始终。创新左右手互换开关门(ErgoDoor)使样品的称量尽可能简单和方便。内置日期和时间功能，进行符合GLP/GMP规范的打印输出，确保您的研究的控制和可追溯性。

特点和利益

称量

采用梅特勒-托利多高分辨率称量技术(HRT)，内置两组砝码。配合全自动校准技术(FACT)，确保天平自动完成校正和线性化。

处理

减少每次称量过程必须的操作步骤。左右手互换开关门(ErgoDoor)，实现一只手打开防风罩的同时，另一手进行加样。

节约空间

折叠式玻璃防风门，为您节约了使用空间，避免凸出天平以外。天平背部的通讯接口可从侧面进行连接。

易于清洁

天平清洁从未如此方便：通过防风罩锁定装置QuickLock)拆卸防风罩，仅需几个步骤，并且所有防风罩玻璃和承水盘均可放入洗碗机清洗。

Standard Features                                   

All models offer

HCD (High Contrast Display)

全自动校准技术(FACT)

保护罩(终端) 

保护罩

Below weighing hook for weighing below the balance

高分辨率称量单元(HRT)

Overload Protection

Built in Date and Time function

SmartTrac shows the entire weighing range

Programmable 3 SmartKeys for shortcut access to applications

Protection of main balance configuration

Weighing in 16 different units

Taring over the entire weighing range

Be adapted to the environment

Applications like Piece counting, Percent weighing, Free factor, Statistics, Formulation, Totaling

Working in different languages: German, English, French, Spanish, Italian, Polish, Czech

规格 - MS105DU 半微量天平

Repeatability (sd) 0.08 mg

Repeatability (sd), fine range 0.03 mg

Linearity 0.15 mg

Sensitivity temperature drift (10-30°C) 2 ppm/ °C

Stabilization time 8 s / 4 s

Usable height of draft shield 234 mm

Weighing pan dimensions ø 80 mm

Balance dimensions LxWxH 358x247x331 mm

Weight of balance 6.6 kg

Repeatability (sd), fine range at low load (20g) 0.02 mg

Linearity (within 10 g), typical value 0.02 mg 

Minimum weight (acc. to USP), typical value 45 mg

Minimum weight (acc. to 1%, k=2), typical value 3 mg

Limit values   

Maximum capacity  120 g

Maximum capacity, fine range 42 g

Readability  0.1 mg

Readability, fine range 0.01 mg

Repeatability (at nominal load) 1)  0.08 mg (100 g)

Repeatability (at low load) 1) 

Linearity deviation  0.15 mg

Sensitivity offset 2)  0.4 mg (100 g)

Typical values 

Repeatability (at nominal load) 1)  0.06 mg (100 g)

Repeatability (at low load) 1)  0.015 mg (20g) 3)

Minimum weight (according to USP)  45 mg 3)

Minimum weight (@U=1%, 2 sd)  3 mg 3)

Settling time  4s / 8s

Sensitivity offset 2)  0.3 mg (100 g)

Dimensions 

Weighing pan dimensions (mm)  ø 80

Balance dimensions LxWxH (mm)  358x247x331

1) Standard deviation (sd)

2) Stability of sensitivity with FACT self-adjustment switched on