提交询价信息 |
发布紧急求购 |
价格:电议
所在地:广东 深圳市
型号:E14-7006-55-2
更新时间:2021-09-27
浏览次数:1475
公司地址:深圳市宝安区45区鸿都商务大厦A栋301
徐(女士)
The gauge is shown in the test position. In the rest position, the plunger shall be above plane V.
图中所示量规柱塞处于检验状态。当柱塞处于静止状态时,W面应比V面缩进更深些。
Reference 尺寸符号 |
Dimension 尺寸(mm) |
Tolerance 公差(mm) |
Reference 尺寸符号 |
Dimension 尺寸(mm) |
Tolerance 公差(mm) |
D |
13.97 |
+0.0/-0.02 |
Q |
15 |
±0.1 |
F |
18.1 |
+0.05/-0.0 |
R |
Approx.近似12.5 |
|
G |
19 |
+0.02/-0.0 |
U |
8 |
±0.1 |
H |
7.5 |
±0.1 |
r |
<0.5 |
|
M |
27.5 |
±0.1 |
r1 |
2.5 |
+0.5/-0.0 |
N |
28.5 |
+0.0/-0.02 |
α |
35° |
±30’ |
P |
10 |
±0.1 |
Purpose目的:
To check protection againstaccidental contact during insertion of caps E14 on finished lamps.
检验成品灯上E14灯头在插入时防止意外接触性能。
Testing测试方法:
The shape of the lamp with regard to protection againstaccidental contact is assumed to be correct if, when the lamp is pushed as far as possible into the gauge, surface W does not protrude beyond surface V. The application of this gauge is restricted to the following lamps when they are fitted with E14 caps, in accordance with sheet 7004-23: candle lamps/round bulb lamps/domestic tubular lamps/pygmy lamps.
如果灯头完全插入量规时,W面没有凸出V面,则可认为灯的防意外接触性能是合格的。此量规仅适用检验装有符合IEC7004-23中所示的E14灯头的烛形灯,球形灯,家用管形灯和小型灯。