供应捷高双向截止阀,T297A05FJTA0000
邮箱;
特征
双向截止阀,用于控制空气,惰性气体,水,油等
与所用密封材料相容的气体/液体
阀门不需要低工作压力
所有产品均受压力设备指令97/23 / EC所涵盖
Mounting brackets for brass bodied valves, suffi x MB (Except pipe size Rp 1, 1 1/4 and 1 1/2)
For protection against corrosion caused by the enviro
nment or the fl uid, co
ntact us
Other pipe co
nnections are available on request
Plug with visual indication and peak voltage suppression or with cable length of 2 m (see Solenoids, Coils & Accessories section)
INSTALLATION 空气,惰性气体,水,油 - 20°C至+ 85°C NBR(腈)
与流体接触的材料
( )确保液体与材料接触的兼容性得到验证
黄铜体不锈钢体
身体黄铜AISI 304 SS
核心管不锈钢不锈钢
核心和插头不锈钢不锈钢
弹簧不锈钢不锈钢
座黄铜不锈钢
供应捷高双向截止阀,T297A05FJTA0000
Valves can also be supplied with FPM (fl uoroelastomer), EPDM (ethylene-propylene) and CR (chloroprene) diaphragms, seals
and discs. Use the appropriate optio
nal suffi x letter for identifi cation
Waterproof enclosure with embedded screw terminal coil according to protection class IP67, CEE-10 连接器铲式插头(电缆 6-10 mm)
连接器规格ISO 4400 / EN 175301-803,形式A
电气安全IEC 335
电气外壳防护成型IP65(EN 60529)
适用于1号和2号液体
电磁阀满足所有相关的EC指令
一般
差压见“规格”[1 bar = 100 kPa]
大粘度65 cSt(mm2 / s)
The solenoid valves can be mounted in any position without affecting operation, unless indicated otherwise in the specifi cations table.
Stainless steel valves are standard supply with mounting brackets
Pipe co
nnection identifi ers are: G = G (ISO 228/1), E = Rp (ISO 7/1) or B = NPT (ANSI 1.20.3)
Installation/maintenance instructions are included with each valve
密封圈,隔膜和圆盘NBR NBR
Explosio
nproof enclosures for use in zo
nes 1/21-2/22, categories 2-3 to ATEX Directive 94/9/EC (see “Explosio
nproof solenoids” section)
Electrical enclosures according to “NEMA” standards are available
Compliance with “UL”, “CSA” and other local approvals available on request
标准电压DC(=):24V-48V
(其他电压和60 Hz请求)AC( ):24V - 48V - 115V - 230V / 50 Hz
供应捷高双向截止阀,T297A05FJTA0000本页产品地址:http://www.yi7.com/sell/show-6968689.html