NAICG 冲击电流发生器

南澳电气NAICG全自动雷电冲击电流发生器主要用以检验电气设备耐受冲击电流稳定的能力，广泛应用于氧化锌避雷器阀片进行冲击电流试验，气象防雷也可以用于其它研究性试验。主可产生4/10us、8／20us、10／350us、18／40us标准冲击电流波形。

 南澳电气（武汉）有限公司（简称“南澳电气”)，是国电网武汉高压研究所改制后成立的高电压输变电检测设备的高新骨干企业，主要从事电力仪器仪表、交直流分压器、互感器类测试设备、高压耐压设备、峰值电压表、超声局放定位系统、工频信号发生器、冲击电压电流发生器 、变压器类试验设备、继电保护测试仪、SF6及开关类检测设备、局部放电超声检测系统、避雷器测试设备、环境人工气候模拟实验装置、电能表校验设备、蓄电池检测仪等产品的研发。

NAICG type Automatic Lightning Impulse Current Generator  南澳电气NAICG全自动雷电冲击电流发生器

产品简介

南澳电气NAICG全自动雷电冲击电流发生器主要用以检验电气设备耐受冲击电流稳定的能力，广泛应用于氧化锌避雷器阀片进行冲击电流试验，气象防雷也可以用于其它研究性试验。

主可产生4/10us、8／20us、10／350us、18／40us标准冲击电流波形。

南澳电气NAICG全自动雷电冲击电流发生器主产品别名

冲击发生器，雷电冲击发生器，电压发生器，脉冲发生器

南澳电气NAICG全自动雷电冲击电流发生器主产品特性

1、体积小、结构紧凑、调波方便；  

2、输出电流大(4/10us波形达到120kA)；

3、本装置采用下球气缸推动触发方式，同步性能好，动作可靠；

4、每只主电容器套管上都串有一只大能量的无感吸能电阻，确保主电容器的安全；

5、采用恒流充电计算机测量控制一体化系统，自动化程度高，抗干扰能力强。

南澳电气NAICG全自动雷电冲击电流发生器主要产品参数

A、五种冲击电流波形发生器的主要技术参数

①额定电压：±60kV或4-120kV

②1/20us陡波冲击电流幅值20kA±5％

③4/1 0us冲击电流幅值100kA±5％

④8/20us雷电冲击电流幅值40kA±5％

⑤30/80us操作冲击电流幅值2kA±5％

⑥18/40us冲击电流幅值20kA±5％

B、六种冲击电流波形发生器的主要技术参数

①额定电压：±60kV或±120kV

②2000us方波冲击电流幅值1.5kA±5％

③1<20us陡波冲击电流幅值20kA±5％

④4/10us雷电冲击电流幅值100kA±5％

⑤30/80us操作冲击电流幅值2kA 4-5％

⑥18/40us冲击电流幅值20kA±5％

⑦18/40us冲击电流幅值20kA±5％

 

Product introduction

The impulse current generator is mainly used to test the stability of electrical equipment withstanding impulse current, it is widely used in impulse current test for zinc oxide surge arrester, meteorological lightning protection and other research trials.

The impulse current generator can produce 4/10us, 8/20us, 10/350us, 18/40us standard impulse current waveform, the technical specification of waveform is in line with national standards and IEC standards, and the product has passed the ministerial appraisal, the main technical performance is in the domestic leading position, has reached the advanced level of international similar products.

Also called name

Impulse Generator, lightning impulse, voltage pulse generator, pulse generator

The Characteristics of the products

(1) Small volume, compact structure, easy to adjust wave.

(2) High output current (4/10us waveform can reach 120kA);

(3) The device adopts the trigger mode which is driven by the under ball cylinder, the performance is good and the operation is reliable;

(4) The casing of each main capacitor is connected with a large non-inductive absorption power resistor to ensure the safety of the main capacitor;

(5) Adopting constant current charging of computer measurement and control integrated system, high degree of automation, strong anti-interference ability.

The parameters of the products

1、Five kinds of impulse current waveform generator

(1) Rated voltage: ± 60kV or 4 ~ 120kV

(2) The amplitude of 1 / 20us steep wave impulse current: 20kA ± 5%

(3) The amplitude of 1 / 10us impulse current: 100kA ± 5%

(3) The amplitude of 8 / 20us lightning impulse current: 40kA ± 5%

(4) The amplitude of 30 / 80us operating impulse current: 2kA ± 5%

(5) the amplitude of 18 / 40us impulse current:  20kA ± 5%

 

2、Six kinds of impulse current waveform generator

(1) Rated voltage: ± 60kV or ± 120kV

(2) The amplitude of 2000us rectangular impulse current: 1.5kA ± 5%

(3) The amplitude of 1 / 20us steep wave impulse current: 20kA ± 5%

(4) The amplitude of 4 / 10us lightning impulse current: 100kA ± 5%

(5) The amplitude of 30 / 80us operating impulse current: 2kA ± 5%

(6) the amplitude of 18 / 40us impulse current:  20kA ± 5%

本页产品地址：http://www.yi7.com/sell/show-7247437.html